Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2010 1:03:45 GMT
For some time now I have been wanting a functional LOTR sword. I've been to darksword-armory.com and seen their anduril, ranger and sage sword, which all look great and very close to the LOTR movie swords. But I want a Boromir sword. Its a strong mans sword, and that's what I am. Does anybody know where I could find a place that sells or could make a Boromir sword that is very close to the LOTR sword?? If not, I'm happy with settling with the Ranger Sword. I've found a site that does a near perfect sword of Boromirs...but they are in Australia, and that would cost a bundle. Thanks for any help
|
|
|
Post by Vincent Dolan on Dec 28, 2010 1:14:43 GMT
As far as I know, Brenden Olszowy of Fable Blades (possibly the one you're referring to) is the only person that makes a functional Boromir's sword. I thought there was another, but it seems I was mistaken.
|
|
Lunaman
Senior Forumite
Posts: 3,974
|
Post by Lunaman on Dec 28, 2010 1:14:52 GMT
You're probably thinking of Brendan Olszowy (he's a member here), and his is the one I would get. Warden of the White TowerChristian Fletcher also made a version of the Boromir sword back in the day, called it the Redeemer. You could probably commission a custom from him as well. RedeemerBeyond that, you're out of luck as far as I know. Custom is the only way to get a Boromir. ***I just remembered that DSA used to make a verison of the Boromir as well, heavy beast wristbreaker of a sword. They could probably make one again if you commissioned it as a custom. There was a review of it on the old site that Sarge did, maybe I can find it. EDIT TO ADD: Yep! Here it is: Darksword Armory Boromir
|
|
|
Post by Brendan Olszowy on Dec 28, 2010 1:25:58 GMT
|
|
Sean (Shadowhowler)
VIP Reviewer
Retired Moderator
No matter where you go, there you are.
Posts: 8,828
|
Post by Sean (Shadowhowler) on Dec 28, 2010 7:11:02 GMT
Mmm... That's a lot of pretty steel....
|
|
Lunaman
Senior Forumite
Posts: 3,974
|
Post by Lunaman on Dec 28, 2010 7:39:53 GMT
Seconded. :shock:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2010 13:18:59 GMT
Brendan doesn't kid around, from everything I've seen and read his work is definitely the real deal. You could do a heck of a lot worse for a Boromir sword.
|
|
|
Post by Vincent Dolan on Dec 28, 2010 13:19:55 GMT
Thirded; I absolutely love the Strider's sword, Turgon's Foe Hammer, and even the Warden of the White Tower set, which is saying something since it was actually my least favorite sword when UC produced it.
|
|
|
Post by Deepbluedave on Dec 28, 2010 20:50:21 GMT
As the owner of two Fable Blades, you will not be disappointed they are exceedingly well made as well as being pleasing to look at.
|
|
Sean (Shadowhowler)
VIP Reviewer
Retired Moderator
No matter where you go, there you are.
Posts: 8,828
|
Post by Sean (Shadowhowler) on Dec 28, 2010 23:12:54 GMT
There is something else that needs to me know about getting a custom sword from Brenno... and its very important. I've gotten custom swords from many makers now... and there are a lot of talented bladesmiths making some amazing swords. However... what really sets Brenno on a whole different level to me is his professionalism. You often hear about how custom blades take months, sometimes years to finish. You hear horror stories about people waiting for ages for their sword, with no updates and no communication. Sadly, this is largely true... a lot of custom smiths are great artists... but lack the professionalism to handle their orders and customers in a timely and friendly manner. Brenno sets the GOLD STANDARD for professionalism in sword making. He works with you very well, taking ideas and offering his until you both agree on a design. Then he sets a time-frame... a VERY quick timeframe, normally no more then 6 weeks.. which is UNHEARD of in the custom sword world. More importantly... he KEEPS to his timeframe... something many custom makers do not do. During the making process he stays in touch... sending progress pics... asking questions and offering ideas about things that can be done during the creative process... he keeps you plugged into the project so that, in the end, you feel as tho you were involved in the making of the sword. Which is awesome! So yes, it goes without saying that his work is amazing... anyone can just look at his website and see that. Also, anyone who has held or handled his swords can tell they are well made and are durable, built to last a long, LONG time. To me tho, its all the other aspects that he handles so well that really set him apart in the industry.
|
|
|
Post by John Lundemo on Dec 29, 2010 2:13:09 GMT
I've made a couple of those with hollow ground blades and fullers in the past. Might be in my website or reviews somewhere if you want to look thanks
|
|
Sean (Shadowhowler)
VIP Reviewer
Retired Moderator
No matter where you go, there you are.
Posts: 8,828
|
Post by Sean (Shadowhowler) on Dec 29, 2010 4:07:28 GMT
I have a hollowground blade from John... and its a thing of beauty. I feel in love with the beautiful blade geometry and balance and FEEL of of My Odinblade... and fully intend to get more. So many swords... so little money. Edit: I just looked on the Odinblades site and there *IS* a Boromir sword on there... and its beautiful.
|
|
Lunaman
Senior Forumite
Posts: 3,974
|
Post by Lunaman on Dec 29, 2010 5:23:40 GMT
|
|
|
Post by Elheru Aran on Dec 29, 2010 14:49:46 GMT
It is indeed a pretty sword, although it doesn't quite meet my standards for closeness to the prop sword. But then, as my wife will tell you, I can be insanely picky about details like that One thing for the OP'er to note, the DSA reproductions of Anduril and the Ranger sword are noted to be rather on the hefty side. This isn't a bad thing if you're just going to hang them on the wall, or if you're going to cut steel barrels on a regular basis but I would perhaps go with another maker if you want a lighter blade...
|
|
Sean (Shadowhowler)
VIP Reviewer
Retired Moderator
No matter where you go, there you are.
Posts: 8,828
|
Post by Sean (Shadowhowler) on Dec 29, 2010 22:08:36 GMT
Most of our custom makers don't like to make exact replicas of the film prop swords... for a couple reasons. 1. Copyright infringement. 2. Creative desire. Custom swordmakers are artists who like to make their own version rather then just re-create someone the sword of someone else.
|
|
|
Post by Elheru Aran on Dec 31, 2010 21:13:52 GMT
Oh, I'm quite aware of all that. I just happen to think that if you're supposed to make a reproduction of an existing sword, then you should try to come as close to that sword as you can. Otherwise it's an 'artistic interpretation' that just happens to resemble the original fairly closely. I happen to think the LOTR swords are, for the most part, quite attractive and well designed in their own way, and that it's a shame nobody but Darksword is really making authentic battle-ready prop replicas.
But as I pointed out earlier, I'm just kinda anal-retentive like that... I would completely understand if I asked someone to make me a prop replica and they said they couldn't due to those reasons. That Boromir sword above would suit me okay if the grip and pommel were a little thicker and there wasn't that rib up at the point, for example...
|
|
Lunaman
Senior Forumite
Posts: 3,974
|
Post by Lunaman on Dec 31, 2010 23:02:05 GMT
If you actually prefer the aesthetics of the Darksword Armoury versions of the LOTR swords to Brendan's and John Lundemo's I don't.....I don't even know how to process that. I just....Huh. I don't know how you can both say you want these swords to be "as close as possible" to the originals and then praise the Darksword Armoury versions. :?: Have you seen them? Nothing against the swords, but they are much further from the originals than John's or Brendan's versions. Heck, their Boromir wasn't even based on the movie sword--it was based off of Christian Fletcher's version. If I wanted a Battle-ready version of this sword (the actual movie prop) and I was concerned with accuracy... I would not go with this version... Instead of either of these.
|
|
|
Post by Federico on Jan 1, 2011 5:07:59 GMT
I'll just add my two cents here...I'm not sure that the "originals" are THAT functionnal. www.wetanz.com/anduril-the-maste ... ollection/ "Physical Specifications * Blade length: 40.9 inches (1040 mm) * Total length: 53.1 inches (1350 mm) * Weight: 4.9 lbs (2.25 kg) * Balance Point: 2.8 inches (70 mm) along the blade measured from the shoulders " Almost 5 pounds. I wonder about the way it handles. OP, if you want to go down the Darksword route, you might want to consider asking Eyal for something custom made. I have two LOTR swords from them, and they're completely different from each other. I have their generic Anduril, and...well, I can't use it. I'm 5'7, 165 pounds and in good shape (I fence and lift weights quite regularly), and it's just too heavy to be handled swiftly. 5.5 lbs and a POB at around 5-6...you get the idea. You need some friggin pipes for that one. It looks nice though. On the other hand, I commissioned from him a Witchking replica, and it's much better handling wise. 4.5 pounds and a 3 inches POB. The grippable area is 12.5 inches long, so it tends to compensate for the weight. Hefty, but quite mangeable. My 2 Canadian cents
|
|
|
Post by Elheru Aran on Jan 1, 2011 22:27:06 GMT
Lunaman, I think I was misunderstood. Darksword is, as far as I know, the only company currently making a production line of functional LOTR swords, as opposed to one-off custom pieces like those by Brenno and John Lundemo. That's what I meant. I have my own quibbles with Darksword's aesthetics-- mainly the pommel on the Ranger, and the length of their Anduril, as well as the swords' weight. I wasn't meaning to say that Darksword's LOTR swords are necessarily better than other makers'. I don't much like the DSA Boromir either, and I wasn't trying to convey that I think their swords are the be-all-and-end-all of functional LOTR replicas. I hope we understand each other now?
|
|
Lunaman
Senior Forumite
Posts: 3,974
|
Post by Lunaman on Jan 1, 2011 23:57:48 GMT
Ahh, I gotcha. No worries, mate, I was just very confused! :lol: I think the main reason there isn't another company making a PRODUCTION line of functional LOTR swords is that United Cutlery holds the rights and license to produce those designs. They didn't choose to make them functional (except for some of the "museum" versions) and it's....very hazy legally to make and sell an identical line of swords when they hold the official license. Making a custom piece is less shady. Darksword has never been very shy about using other people's designs for their production line though, so they plow right ahead. Albion PrinceDarksword Black Knight (on which they've since swapped out the guard for a "Henry V" style guard--wonder why?) Jody Samson Leafblade GladiusDarksword "Roman Sparta"[sic]
|
|