|
Post by eastman on Dec 3, 2023 0:04:45 GMT
In the last week, there was a question posted about Type XIV options. There seem to be even fewer options for a Type XVI (not the more commonly produced XVIa Longsword).
At the lower end, I have a Dynasty Forge Archduke. It is a very pretty sword, but it just doesn't have the right feel to me. The hollow-work pommel is too light for a good balance. Could probably also use a little more distal taper.
I have an Albion Prince on order. Handling is everything the Archduke isn't, and I'm really looking forward to this in about a year.
What else is out there? Anyone else have a favorite XVI?
|
|
|
Post by fester on Dec 3, 2023 17:48:56 GMT
I believe the vision line Lyon sword is a type xvi.
|
|
|
Post by eastman on Dec 3, 2023 17:59:47 GMT
I believe the vision line Lyon sword is a type xvi.
Thanks. That looks like a great option for a Type XVI. Added to my "Swords to order in 2024" list.
|
|
|
Post by AndiTheBarvarian on Dec 3, 2023 18:16:28 GMT
The Windlass Battlecry Agincourt is a XVI I think. The hilt is a big hand and a half hilt but the blade is a nimble single hander blade.
|
|
|
Post by eastman on Dec 3, 2023 21:34:29 GMT
The Windlass Battlecry Agincourt is a XVI I think. The hilt is a big hand and a half hilt but the blade is a nimble single hander blade. that seems like halfway between a XVI and a XVIa, but is probably another good option at a reasonable price point
one of the characteristics I like in the Type XVI is the nearly parallel edges transitioning to an acute needle-like point. To me, that is what sets the XVI above the XIV.
|
|
|
Post by Eric Bergeron on Dec 4, 2023 3:03:50 GMT
Have you also looked at the XVIII type? I've been a fan of that style as well for a single hand sword.
|
|
|
Post by eastman on Dec 4, 2023 4:25:47 GMT
I have some members of the XVIII family and they are fine too.
|
|
|
Post by nddave on Dec 5, 2023 14:16:46 GMT
|
|
AJGBlack
Member
"This world will stress you like Orson Wells on the radio." -RTJ
Posts: 388
|
Post by AJGBlack on Dec 5, 2023 14:41:56 GMT
I totally agree that the Kingston Arms XIV is more of a XVI. That central ridge from the fuller to the point is very clear and pronounced. The Knights Riding Sword is a real oddity. I like it, even though it appears pretty far off from the original its based on. It's a stout, brutal blade despite its small stature. It's a little over built, but a lot of fun.
|
|
|
Post by nddave on Dec 5, 2023 15:06:06 GMT
I totally agree that the Kingston Arms XIV is more of a XVI. That central ridge from the fuller to the point is very clear and pronounced. The Knights Riding Sword is a real oddity. I like it, even though it appears pretty far off from the original its based on. It's a stout, brutal blade despite its small stature. It's a little over built, but a lot of fun. Yea that and it's base width really throw it off from being a XIV. The Riding Sword carries that old built like a "Brick S*** House" design the manufacturer was lauded for back when they were Gen2. Not the prettiest swords but they bust through a cinder block like nobody's business lol!
|
|
|
Post by eastman on Dec 6, 2023 1:48:15 GMT
I had the Kingston, but I consider the blade shape to be more XIV than XVI. I do like the Ronin, so I added that to my KoA wishlist.
Right now, the Ronin Italian and the Vision Lyon are my top 2 picks for additional Type XVI swords.
|
|
|
Post by tomtx on Dec 6, 2023 15:42:05 GMT
Well, no one mentioned the Albion Squire... Same blade as the Prince, but from a function and comfort perspective I like the guard, grip, and pommel of the Squire much more. The Prince grip is very thin, and the pommel has edges. I get a much more comfortable and secure grip with the Squire.
Certainly the Prince looks great, but the Squire isn't bad. It has a clean, classic look to it. If I had to keep one of them it would be the Squire.
|
|
|
Post by eastman on Dec 7, 2023 1:43:57 GMT
Well, no one mentioned the Albion Squire... Same blade as the Prince, but from a function and comfort perspective I like the guard, grip, and pommel of the Squire much more. The Prince grip is very thin, and the pommel has edges. I get a much more comfortable and secure grip with the Squire. Certainly the Prince looks great, but the Squire isn't bad. It has a clean, classic look to it. If I had to keep one of them it would be the Squire. of the 2, I decided I liked the Prince better than the Squire. If there were no more Princes, the Squire would have been fine.
|
|
|
Post by Paladin74 on Feb 5, 2024 21:25:32 GMT
Well, no one mentioned the Albion Squire... Same blade as the Prince, but from a function and comfort perspective I like the guard, grip, and pommel of the Squire much more. The Prince grip is very thin, and the pommel has edges. I get a much more comfortable and secure grip with the Squire. Certainly the Prince looks great, but the Squire isn't bad. It has a clean, classic look to it. If I had to keep one of them it would be the Squire. I have this sword; I ordered a CF scabbard and rig shortly after I bought it in 2020. I finally got that rig last year; worth the wait though. Anyway, the sword isn't as pretty as the Prince, but imo it feels better in hand. Not a huge fan of the grip on the Prince, despite having relatively small hands.
|
|
|
Post by toddstratton1 on Feb 6, 2024 2:22:34 GMT
Not historically focused but the XVI arming sword Angus Trim makes is absolutely exceptional.
|
|
|
Post by eastman on Feb 15, 2024 3:27:13 GMT
It looks like the next XVI to arrive will be the Valiant Brighton.
|
|
|
Post by madirish on Feb 16, 2024 3:12:00 GMT
|
|
|
Post by ggower on Feb 18, 2024 0:14:05 GMT
I owned an Albion Prince and loved the aesthetic. But it didn't handle well for me so I let it go. I recently picked up an Atrim XVI.10 and it feels weightless, like holding a feather. Definitely recommend trying any of the Atrim Type XVIs if possible.
|
|
|
Post by eastman on Feb 18, 2024 4:58:20 GMT
The Lyon is based on an ATrim blade, and it is still on my "swords to buy" list. Not many other options for me to get new production swords with ATrim blades.
|
|
|
Post by blackngold on Mar 9, 2024 18:14:00 GMT
Well, no one mentioned the Albion Squire... Same blade as the Prince, but from a function and comfort perspective I like the guard, grip, and pommel of the Squire much more. The Prince grip is very thin, and the pommel has edges. I get a much more comfortable and secure grip with the Squire. Certainly the Prince looks great, but the Squire isn't bad. It has a clean, classic look to it. If I had to keep one of them it would be the Squire. I have this sword; I ordered a CF scabbard and rig shortly after I bought it in 2020. I finally got that rig last year; worth the wait though. Anyway, the sword isn't as pretty as the Prince, but imo it feels better in hand. Not a huge fan of the grip on the Prince, despite having relatively small hands. Wow-- the name "Christian Fletcher" certainly takes me back! I had kind of stepped away from this hobby for quite a while, but I remember when he was selling early ATrims and just getting into the scabbard business! Good to hear he's still doing it. I haven't handled a Prince, but have handled the Squire and remember its' pommel seated itself pretty neatly into the bottom corner of my palm, a surprisingly "ergonomic" feel. Enjoy your sword and CF rig!
|
|