|
|
Post by BaronWVS on Oct 23, 2012 20:40:58 GMT
Hey guys!
I recently bought one of the (highly controversial) Windlass Conan replica swords. Overall I'm satisfied with it (although it is RIDICULOUSLY heavy at 8 pounds!). Problem is, where am I gonna put the dang thing? I bought it without the scabbard and (since I'm me) got the thing sharpened before shipping.
Is there a wall hanger that can safely accommodate this gorgeous monster? Have any of you bought the optional sheath? Is it made out of real fur or faux fur? I definitely don't want to leave this thing leaning against the wall just in case somebody walks by and accidentally shears off a toe (unlikely, I know, but I'm a safety freak).
Thanks in advance for your input!
Cheers,
B
|
|
Taran
Member
Posts: 2,621
|
Post by Taran on Oct 25, 2012 15:26:20 GMT
There are a lot of methods of hanging stuff on the wall that should work just fine. Thing is, though, you probably want to make sure it gets stuck into a stud rather than just hanging off the drywall.
|
|
Sean (Shadowhowler)
VIP Reviewer
Retired Moderator
No matter where you go, there you are.
Posts: 8,828
|
Post by Sean (Shadowhowler) on Oct 25, 2012 16:24:51 GMT
Yeh, at 8 pounds and sharp, you REALLY wanna make sure you anchor it to a stud and not the drywall. :shock:
|
|
jhart06
Member
Slowly coming back from the depths...
Posts: 3,292
|
Post by jhart06 on Oct 25, 2012 16:36:47 GMT
I'd buy a block of wood, shape it like a shield, anchor that to three places, or five (triangle or cross shape) and then two-four for the sword itself... Basically, you want to anchor it to a stud and distribute weight evenly.
|
|
|
|
Post by BaronWVS on Oct 27, 2012 19:21:23 GMT
Do they sell something like this? I've never tried anything of the sort and would rather go with a pre-made product than something I whip up myself.
Cheers,
B
|
|
|
|
Post by Pogo4321 on Oct 27, 2012 19:57:20 GMT
Kris Cutlery sells this one that looks very solid:  |
|
|
|
Post by BaronWVS on Oct 27, 2012 20:38:21 GMT
By a "stud" do you mean in a post? I've got wooden walls down here in the room where I keep my swords, so I think anything I screw into them should be relatively secure but, of course, I want to be ultra-careful with something this sharp and heavy.
|
|
|
|
Post by BaronWVS on Oct 27, 2012 20:52:22 GMT
Oh, and thanks everyone for your advice. I don't post here too often, but whenever I've had a question or issue with one of my blades the folks here have always been immensely polite and helpful.  |
|
Taran
Member
Posts: 2,621
|
Post by Taran on Oct 28, 2012 3:55:20 GMT
Is it actual planking or what passed for panelling back in the 70s? If it is actual planks at quarter inch or thicker, then you have a LOT more options.
Yes, I probably do mean a "post." The stud is the vertical 2x4 board that makes up the vertical portion of the framing to which your paneling is attached. When I say "post," though, I am talking about the corners that actually hold up most of the weight of the house.
|
|
|
|
Post by BaronWVS on Oct 28, 2012 19:13:54 GMT
They're actual planks at least a quarter of an inch thick.
Taking a closer look at the sword, I think I might be able to add some supports at the point where the dull part of the blade protrudes (right at the bottom/top of the blade that's covered in that sempriniin' Rob Cobb designed guard). I'm just wondering if I should go with some hook screws from Home Depot or if I should use actual sword hangers. Of course, the damned guard is so thick I'm not sure a conventional sword hanger can accommodate it.
Cheers,
B
|
|
|
|
Post by Insane on Oct 29, 2012 7:22:19 GMT
If you have something like a table or dressoir to put it on you could find a big stone or rock. Then grind in an opening where you can fit in the blade in a safe way. I did this with a knife i've forged and i think it looks great. Ofcourse a blade as massive as yours you have to place it horizontal on a large enough stone. But this is the idea:   |
|
|
|
Post by ConanfanBrazil on Nov 10, 2012 18:47:30 GMT
I have the Atlantean and the Father's, and I bought a double tier stand meant for katanas. But it worked prety well. Let me see if I can post a picture:  |
|
|
|
Post by ConanfanBrazil on Nov 10, 2012 18:54:56 GMT
Oh, and by the way, the Windlass Atlantean is AMAZING! Very solid, the most affordable funcional Atlantean in the market. Too bad the only real competitor is Albion...
Regards,
Alexander.
|
|
