Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 4, 2012 19:48:12 GMT
hi i have partially amputated fingers so this makes it difficult for me hold a sword one handed . i thought maybe i could get a sword with a narrow enough tang so that i can take the grips off the hold and hold the sword by the tang. please does anyone have any suggestions . i need help really bad
|
|
|
Post by Elheru Aran on Oct 4, 2012 20:09:24 GMT
Hey,
This is somewhat of a difficult situation you're in (but you don't need me telling you that, pardon me).
Here's the thing... the grip is necessary to absorb the shock of such a long piece of metal hitting the target. It also performs a support function for European style swords, in that it reinforces the tang by supporting the pommel and guard, which helps prevent breaking at the junction of blade and tang.
As such I would look into getting a sword with a narrow grip, rather than removing the grip entirely. A good few single-handed swords would qualify, such as the Hanwei/Tinker Early Medieval Single Handed or H/T Norman.
Alternatively, you could look into getting a 'tactical' style custom, which would probably have a full tang with narrow slabs riveted to the tang for a grip. Still fairly narrow but with enough material on it to be comfortable.
Hope we can help you work out a solution, and welcome...
|
|
Lunaman
Senior Forumite
Posts: 3,974
|
Post by Lunaman on Oct 4, 2012 20:20:50 GMT
THIS is my favorite sword with a narrower-than-average handle. Many people modify the grip to be thicker for reasons of comfort, but the stock grip might suit you. If the grip is still too large, it's very easy to dismantle the sword and replace the grip (it's held together with a hex nut and can be taken apart with a simple allen key). Perhaps the tang could be covered and the hilt assembled with a stabilized linen wrap like the one Lukas used on his new scabbard? The covering would be very thin, but very strong.
|
|
|
Post by Elheru Aran on Oct 4, 2012 21:47:39 GMT
Or that.^
I have the non-fullered version, the grip it came with was quite thin indeed-- was probably no more than 1-1/8" at its widest point, likely closer to 1" tapering down to around 3/4" or so. Definitely very thin, and as a bonus, you'll be able to use it with your off hand to give you more control and safety.
Which is another option-- have you thought about teaching yourself to cut with your off hand? I suspect you've probably become rather more dextrous with it anyway, could give it a shot...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 5, 2012 1:16:04 GMT
How about a swept hilt rapier which has a guard which encloses/surrounds the hand somewhat, or a basket-hilt sword, will that work one handed?
|
|
|
Post by Lukas MG (chenessfan) on Oct 5, 2012 1:52:37 GMT
I believe Zach might be onto something... I can assure you a linen wrap done this way will be very strong. Just do multiple layers until you reached the desired thickness. If you want more details regarding this, feel free to pm me.
The H/T bastard sword would indeed be a great choice for you I think. A second hand on the pommel will make things a lot easier if you can't securely hold a sword with one hand only.
|
|
|
Post by Svadilfari on Oct 5, 2012 6:14:53 GMT
You haven't said what type of sword you were after, and what use you'll be giving it ? From what you've said, and what most seem to have assumed, you've been thinking , European, Medieval ? Depending on what degree of damage you have to your fingers..maybe somthing rapier-like might give you a better grip ? If cutting is your aim, whatever you choose, you'll have to be sure of having a firm grip of your weapon. If it's cutting you want..could I possibly suggest something a lil left field - an indian "gauntlet sword, or Pata ?? ( Something like this example www.oriental-arms.co.il/photos.php?id=4153 ) I think you'll get the general idea on how it's grasped ? I don't know if anyone makes them, however ??
|
|
Taran
Member
Posts: 2,621
|
Post by Taran on Oct 5, 2012 9:17:29 GMT
That is one I will have to get, eventually. 'Willow" is easily one of my favourite movies.
|
|
|
Post by Deepbluedave on Oct 5, 2012 21:00:17 GMT
You might want to take a look at swords with a waisted grip, just measured my Munich and it is 3/4 of an inch in diameter at the pommel whilst 1 inch diameter at the guard making it a very tiny grip for average sized hands, this is an option on lots of Albion swords, or it might just give you some idea of whats out there. Attachments:
|
|
|
Post by Jussi Ekholm on Oct 5, 2012 21:12:39 GMT
Welcome to the forum.
I agree with Svadilfari that in order to give the best possible advice, we would first need to know what swordtype you are looking for.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 9, 2012 3:49:31 GMT
well i'm after a sword that i can use well with one hand so the style really dose not matter thank u all for the help
|
|
|
Post by Odingaard on Oct 9, 2012 5:33:55 GMT
Perhaps you should talk with Baltimore Knife and Sword about doing you up something. They use welded pommels/guards and only use a leather wrap over the tang. One could remove the thicker leather and use something thinner. They have a variety of blade designs to choose from in stock at Kult of Athena. I am sure they would take your custom request as well, as they are generally nice guys to work with.
|
|
|
Post by Deepbluedave on Oct 9, 2012 9:40:34 GMT
Maybe somesort of tactical sword, thinking VA zombie slayer then you could alter the thickness to spot on.
|
|
Vhels
Registered
Posts: 1
|
Post by Vhels on Jan 16, 2013 2:51:26 GMT
Why search for the perfect sword when one could be crafted specially for you. I'm a talented craftsman and I'd be glad to craft a fine combat-capable blade. The only catch is that, due to unfortunate circumstances, I need a special piece of equipment to craft anything. If you'd be able and willing to ship to me a 65" framed fresnel lens from greenpowerscience.com (or anywhere for that matter) ill craft for you 2 of the finest blades in a style to your likening made just for you. The lens from green power science would cost approximately $300 but if you can find a lens that size or bigger from another source, say harvested from a big old projection-screen tv, I'd be fine with that as well although it may take time to build a frame. Abc112888@hotmail.com! is my email
|
|
|
Post by kasim18 on Jan 16, 2013 3:30:29 GMT
maybe something like the hanwei practical jian, very slim blade, not really a serious cutter but it has the second slimmest hilt in my collection. I am told that if the blade is shortened and reground to a proper point you eliminate the flex, an annoying factor for serious cutting. fine as is if that isn't an issue. however, of the swords I have, the prize for slimmest hilt goes to my hanwei fencing sword. It looks like it is discontinued, but that style. I have larger hands and it feels like a twig. there is also this, looks very slim. best of luck to you www.sword-buyers-guide.com/arming-sword.html
|
|
|
Post by kasim18 on Jan 16, 2013 3:32:10 GMT
any rapier/smallsword would probably work
|
|
|
Post by Anders on Jan 18, 2013 12:22:10 GMT
Wait, how partially amputated are we talking here? Like are you missing individual fingers or are all fingers on your main hand shorter than they should be?
Sorry if it's a personal question but I have a hard time picturing this so it's difficult to give advice.
|
|