|
Post by Cottontail Customs on Apr 29, 2024 20:12:38 GMT
I made a simple video showing how to shim a saya koiguchi for a better fit.
I'm working on making more vids instead of "print" but hey, we can't all be Matthew Jensens so don't expect much, lol.
|
|
|
Post by jimkiev on Apr 30, 2024 20:17:29 GMT
Thank you! Very easy to follow instructions. Good quality video as well.
|
|
steveboy
Member
Measure twice, cut once.
Posts: 369
|
Post by steveboy on May 1, 2024 16:51:05 GMT
Nice tutorial! A couple of additions that might be helpful: - When gluing down the shim, I insert a pencil or rod and clamp it down overnight. This helps ensure that the entire surface of the shim adheres to the koiguchi. I use a small clamp that I lined with adhesive-backed cork so that the metal won't scratch the saya, but you can simply put a folded paper towel under the outer side of the clamp.
- When the glue is dry, I file a slight ramp or bevel into shim at the koiguchi. This helps the habaki to slide in without hitting a blunt shim end that can cause splintering or cracking (even more likely if you've stacked two shims).
- Sometimes one shim is too loose and two are too tight. It's okay to go with two shims and then shave it down with a needle file.
- When filing or sanding, be sure to angle the saya so that the koiguchi is the lowest point. Otherwise sawdust falls into the saya, which can adhere to or even scratch a blade. If you have a compressor, it's a good idea to blow air into the saya after the shim is finished.
|
|