Post by landonmmorris1 on Feb 25, 2024 22:55:30 GMT
Good afternoon ladies and gentlemen
I will miss these swords, but I feel I need to thin my collection a little bit
These are some swords that you might not see very often
I’m looking for cash or the equivalent in trades-
if somebody is interested in multiple swords for a more valuable one I’m happy with that as well.
First on the chopping block
*Vladimir Cervenka single edge Viking sword
imgur.com/a/wDLvWKp
I’ve had lots of his work over the years and he is a solid maker. His blade has a roughness, which makes it look authentic and somebody replaced the grip giving it more of a rustic look.
Handles beautifully.
This is approximately 36 inches
weighs 2.5 pounds
I’ve never cut with it it does not have a scabbard
$750 or tradsies
—————
*Rick Barrett fantasy sword with spikes
Very rarely will you see a master sword maker have blades in this price point -so if you want to collect some of his work, or feel it out, this is the chance
imgur.com/a/PE323FC
A fun one I picked up a few months ago never been used.
Has a beautiful ordinate bone handle with a spike protruding from the back of it. It has a little diamonds and an opal doublet in the hilt.
This is definitely a fantasy sword and for me, it’s a fantasy villains sword, but I like that -you don’t often see these things
The spikes on the shell guard are very sharp
And it handles beautifully- like a deadly rapier
This has a beautiful solid metal scabbard
I love all the extra details he put on the ricasso of the blade - as well as the hilt details- a deadly work of art
It’s approximately 40 inches long
weighs 2.2 pounds
handles beautifully
$900 or tradsies
————-
Elven sword by Rick Barrett
imgur.com/a/oMlJtEb
This is more similar to what we know Rick Barrett for - you can see the beautiful straight wakasashi style blade in his Damascus
This is his design for an elven sword
it’s light as a feather. It comes with a beautifully ornate scabbard and it’s approximate
23 inches long.
It feels like it weighs a pound swift, deadly blade. Look close into his craftsmanship. It is beautiful Damascus.
$2700 or trade
_____________
*Angus trim 1557
imgur.com/a/p4A7GdL
The hilt has been blackened and peened - two gold plated coins have been put in the Pommel
I love the red coloring on this and anyone who’s handled Angus trims work knows how nice it is. The blade has been brightly polished, and I’ll need to polish it again before it goes out
Comes with a scabbard that I made. Not so bad -chape is from DBK
This is differentially heat treated something that Angus was doing for a while and makes a harder edge on the blade with a softer center
I had cut with this. No Knick’s or dings
$1,200 or trade
_____________
*This is an Albion Arn
imgur.com/a/4j4lSfP
New from the box I still have the original packaging. I left the wrapping on the hilt because I only planned to leave it adorning my wall
Has never been cut with it. I’ve barely handled the sword- it’s just been sitting on my wall.
It’s beautifully made, Albion speaks
for itself
Specifications
Overall length: 40.9″ (104 cm)
Blade length: 34.6″ (88 cm)
Blade width: 1.89″ (4.8 cm)
CoG: 6.1″ (15.5 cm)
CoP: 23.25″ (59 cm)
Weight: 2.76 lbs (1.25 kg)
If you like crusader style swords, this is a must
No scabbard. $1200 or best offer.
Remember, I’m always happy for trades
____________
*Damascus steel custom falcutta from ancient Forge
imgur.com/a/e8h9GCu
Probably one of the best Falcutta’s on the market
He did a lot of research with the originals to do the blade and the scabbard
Definitely a chopper. It just feels like a dangerous weapon in the hand.
If you check out his page, you can see the steps of how we created it
www.facebook.com/groups/ULAweapons/permalink/7414708951913887/?mibextid=W9rl1R
What impresses me about it is all the details and fullers on the blade and the Damascus is a little bit rougher, which makes it just more… Ancient
I paid close to $4000 for this looking for $2600 or trade
Comes with the scabbard of course and it has a little matching knife
——————-
*This is a windless Greek xiphos
Or deepeeka?
imgur.com/a/hi17o0Y
Definitely not your finest crafted sword but it would get the job done. Has bone in the hilt
comes with a scabbard
Overall Length: 33 1/4'' Blade: 26 9/16'' 3 lb 0.3 oz
$150+ shipping or trade
__________
* This is made by Nicholas Cochiolo
imgur.com/a/kLpWBJV
This is both a rare maker, and a rare sword. I just don’t see this style from a lot of makers
This is a tight beautifully weighted German 1550s katzbalder with full metal hilt
It handles beautifully in the hand
6150 mono steel blade
I’ve had a chance to do some cutting with it it packs a punch-
Approximately 2 1/2 lb., 31 inches long 5160 steel if you haven’t had a chance to get his work, he’s doing some collaborations with Ugo. I would recommend
This will need to polish before it goes out. No Nick or dings.
$600 or tradsies
___________
*A great war sword by Angus trim- that is now… smaller
imgur.com/a/DYWGd41
What inspired me to put this up for sale is not only that it resembles the Witcher sword. 30 inch blade with a two handed handle, but it seems an Angus trim has a few he’s done just like this lately!
However, those ones are on purpose. This is a sword that I enjoyed so much. It eventually broke at the tip, and the best thing I could do was have an expert reshape it into another sword.
Came out great
it handles well and it’s quite the chopper
Approximately 31 inches long 9 inch handle 2 1/2 pounds. I would recommend this in any zombie apocalypse. It’s a tough blade.
$500 or trade
Shipping falls on the new owners! I could have it shipped through whichever service they prefer
I hope they all fine new homes and thank you for looking
I will miss these swords, but I feel I need to thin my collection a little bit
These are some swords that you might not see very often
I’m looking for cash or the equivalent in trades-
if somebody is interested in multiple swords for a more valuable one I’m happy with that as well.
First on the chopping block
*Vladimir Cervenka single edge Viking sword
imgur.com/a/wDLvWKp
I’ve had lots of his work over the years and he is a solid maker. His blade has a roughness, which makes it look authentic and somebody replaced the grip giving it more of a rustic look.
Handles beautifully.
This is approximately 36 inches
weighs 2.5 pounds
I’ve never cut with it it does not have a scabbard
$750 or tradsies
—————
*Rick Barrett fantasy sword with spikes
Very rarely will you see a master sword maker have blades in this price point -so if you want to collect some of his work, or feel it out, this is the chance
imgur.com/a/PE323FC
A fun one I picked up a few months ago never been used.
Has a beautiful ordinate bone handle with a spike protruding from the back of it. It has a little diamonds and an opal doublet in the hilt.
This is definitely a fantasy sword and for me, it’s a fantasy villains sword, but I like that -you don’t often see these things
The spikes on the shell guard are very sharp
And it handles beautifully- like a deadly rapier
This has a beautiful solid metal scabbard
I love all the extra details he put on the ricasso of the blade - as well as the hilt details- a deadly work of art
It’s approximately 40 inches long
weighs 2.2 pounds
handles beautifully
$900 or tradsies
————-
Elven sword by Rick Barrett
imgur.com/a/oMlJtEb
This is more similar to what we know Rick Barrett for - you can see the beautiful straight wakasashi style blade in his Damascus
This is his design for an elven sword
it’s light as a feather. It comes with a beautifully ornate scabbard and it’s approximate
23 inches long.
It feels like it weighs a pound swift, deadly blade. Look close into his craftsmanship. It is beautiful Damascus.
$2700 or trade
_____________
*Angus trim 1557
imgur.com/a/p4A7GdL
The hilt has been blackened and peened - two gold plated coins have been put in the Pommel
I love the red coloring on this and anyone who’s handled Angus trims work knows how nice it is. The blade has been brightly polished, and I’ll need to polish it again before it goes out
Comes with a scabbard that I made. Not so bad -chape is from DBK
This is differentially heat treated something that Angus was doing for a while and makes a harder edge on the blade with a softer center
I had cut with this. No Knick’s or dings
$1,200 or trade
_____________
*This is an Albion Arn
imgur.com/a/4j4lSfP
New from the box I still have the original packaging. I left the wrapping on the hilt because I only planned to leave it adorning my wall
Has never been cut with it. I’ve barely handled the sword- it’s just been sitting on my wall.
It’s beautifully made, Albion speaks
for itself
Specifications
Overall length: 40.9″ (104 cm)
Blade length: 34.6″ (88 cm)
Blade width: 1.89″ (4.8 cm)
CoG: 6.1″ (15.5 cm)
CoP: 23.25″ (59 cm)
Weight: 2.76 lbs (1.25 kg)
If you like crusader style swords, this is a must
No scabbard. $1200 or best offer.
Remember, I’m always happy for trades
____________
*Damascus steel custom falcutta from ancient Forge
imgur.com/a/e8h9GCu
Probably one of the best Falcutta’s on the market
He did a lot of research with the originals to do the blade and the scabbard
Definitely a chopper. It just feels like a dangerous weapon in the hand.
If you check out his page, you can see the steps of how we created it
www.facebook.com/groups/ULAweapons/permalink/7414708951913887/?mibextid=W9rl1R
What impresses me about it is all the details and fullers on the blade and the Damascus is a little bit rougher, which makes it just more… Ancient
I paid close to $4000 for this looking for $2600 or trade
Comes with the scabbard of course and it has a little matching knife
——————-
*This is a windless Greek xiphos
Or deepeeka?
imgur.com/a/hi17o0Y
Definitely not your finest crafted sword but it would get the job done. Has bone in the hilt
comes with a scabbard
Overall Length: 33 1/4'' Blade: 26 9/16'' 3 lb 0.3 oz
$150+ shipping or trade
__________
* This is made by Nicholas Cochiolo
imgur.com/a/kLpWBJV
This is both a rare maker, and a rare sword. I just don’t see this style from a lot of makers
This is a tight beautifully weighted German 1550s katzbalder with full metal hilt
It handles beautifully in the hand
6150 mono steel blade
I’ve had a chance to do some cutting with it it packs a punch-
Approximately 2 1/2 lb., 31 inches long 5160 steel if you haven’t had a chance to get his work, he’s doing some collaborations with Ugo. I would recommend
This will need to polish before it goes out. No Nick or dings.
$600 or tradsies
___________
*A great war sword by Angus trim- that is now… smaller
imgur.com/a/DYWGd41
What inspired me to put this up for sale is not only that it resembles the Witcher sword. 30 inch blade with a two handed handle, but it seems an Angus trim has a few he’s done just like this lately!
However, those ones are on purpose. This is a sword that I enjoyed so much. It eventually broke at the tip, and the best thing I could do was have an expert reshape it into another sword.
Came out great
it handles well and it’s quite the chopper
Approximately 31 inches long 9 inch handle 2 1/2 pounds. I would recommend this in any zombie apocalypse. It’s a tough blade.
$500 or trade
Shipping falls on the new owners! I could have it shipped through whichever service they prefer
I hope they all fine new homes and thank you for looking