|
Post by xingyusword on Jan 12, 2024 5:49:43 GMT
The cpm-3v powder steel, which is known as God Steel, is made in cooperation with the country's top millers.The steel plate of cpm-3v is made by a powder steelmaking process, the granularity is fine enough, and one more point is to solve a very important problem of alloy occurring dilution, the performance of the swords made with it is outstanding. We also add a bos heat treatment to it, which is why it's particularly expensive. It's not that powdered steel can't be made into hamon, it's that there's generally no vacuum heat treatment available, so it's hard to make hamon. with this level of strips, even if the hamon is milled (and some would call it fake hamon), it doesn't really matter if the hamon is real or fake anymore, it's already here.
|
|
|
Post by xingyusword on Jan 12, 2024 5:51:39 GMT
Why is the translation always wrong. It's with the country's top grinding craftsmen
|
|
|
Post by JH Lee on Jan 12, 2024 17:24:10 GMT
To be clear, is the hamon just cosmetic, or is there actual differential hardening? It was difficult to understand your post.
|
|
mrstabby
Member
Posts: 1,195
Member is Online
|
Post by mrstabby on Jan 12, 2024 18:10:00 GMT
I understood it to be cosmetic. Don't think CPM-3V can make such a visible Hamon, temper line maybe, Hamon no. AFIAK the relatively high Chromium content means bad Hamon results. It's also quite deep hardening, so differential hardening is a bit more difficult but not impossible. Maybe there was a line that got a bit of make-up?
|
|
|
Post by xingyusword on Jan 13, 2024 8:51:37 GMT
I understood it to be cosmetic. Don't think CPM-3V can make such a visible Hamon, temper line maybe, Hamon no. AFIAK the relatively high Chromium content means bad Hamon results. It's also quite deep hardening, so differential hardening is a bit more difficult but not impossible. Maybe there was a line that got a bit of make-up? Yes, this is not Tsuchioki's blade pattern, it was sharpened by grinding.
|
|
|
Post by xingyusword on Jan 13, 2024 8:54:30 GMT
To be clear, is the hamon just cosmetic, or is there actual differential hardening? It was difficult to understand your post. The cpm-3v steel is then hardened by bos heat treatment, so his combat performance is unquestionable, and the grinding gives it an edge pattern that is also artistic, so this is a sword where performance and art coexist.
|
|