|
Post by whiteshield on Oct 22, 2023 16:15:09 GMT
Hello does the Cerakote Ceramic Trim Coating protect a sword from rust?
|
|
|
Post by mrstabby on Oct 22, 2023 18:55:53 GMT
Disclaimer: I have had no direct contact with Ceracote. Honestly, I wouldn't though. I think it is a sort of polymer resin with ceramics added, so it's probably like lacquering the whole blade. If this is something you want, it probably works if it works on car metal (I read it should work on metal, but you should read the instructions if it's OK for bare metal or only plastic and car paint). I think it might be a hassle to get rid of later and the cutting edge will feel dull, because it is also coated (unless you leave it uncoated, but then you need to apply oil again, so...).
|
|
|
Post by madirish on Oct 22, 2023 23:59:50 GMT
Short answer, per Cerakote, is "yes" Cerakote grades can be used on a variety of metals, including steel. Longer answer is, it depends...will you use the sword? Then you need to choose a coating that can handle flexing significantly without losing its bond to the surface. There are several different Cerakote grades...one might work...but, as Mr. Stabby said, I think the edge would suffer and need to be oiled when shrpened anyway. ALso, cerakote is not rustproof....just rust preventative. DO they have "clear" coatings that would work in a flexible application is a question, too.
|
|
pgandy
Moderator
Senior Forumite
Posts: 10,296
|
Post by pgandy on Oct 23, 2023 0:19:46 GMT
I’ve no experience with Cerakote, but I would consider the flex ability before deciding. Also, when that gets on the edge it will reduce the cutting ability if that means anything. Plus, the fact if it’s a cutting blade when resharpening you are going to lose at least some. Only food for thought.
|
|
|
Post by toddstratton1 on Oct 23, 2023 0:34:39 GMT
Cerakote works great for guns, but not really a good fit for swords. Using different kinds of wax works great but I don't know of any permanent non removable Coatings that you can add for swords.
|
|
|
Post by whiteshield on Oct 25, 2023 9:38:52 GMT
I am only using them for Busse knives. They will not flex because they are thick. But the rust will stay off right? I needed them for storage for a few months.
|
|
|
Post by mrstabby on Oct 25, 2023 10:42:53 GMT
It should, if the blade is clean before you apply it. Be aware that the coating might not want to come off easily though, especially on rougher finishes where it can really grab on. Renaissance Wax works well for me, but for some it doesn't. Others use car wax (carnauba wax) for long term storage, which also seems to work. Vaseline also does well for medium term storage (a few months). Does not look good but works. But it is your call, the Cerakote might just be more permanent than the others. As I said before though, I have no first hand experience with it, it just seems to be formulated to stay on.
|
|
|
Post by toddstratton1 on Oct 25, 2023 16:28:29 GMT
I am only using them for Busse knives. They will not flex because they are thick. But the rust will stay off right? I needed them for storage for a few months. If you are storing for a few months you can safely do so with a proper coating of wax on the blade and hilt work furniture. For even longer storage I believe some people have mentioned using petroleum jelly and covering the swords in rags or towels, something of that nature. Either way Wax would definitely be a good option without issue. No need to cerakote coat a sword if thats the only concern.
|
|