|
|
Post by mdmac on Sept 8, 2022 20:09:53 GMT
I have acquired two Fabre swords second hand prior to this -- a Type XIIa and a Type XV based on a prototype from the Wallace Collection. Both are superb. He does not disappoint. Silly question maybe, but needs asking. What differentiates his work over say an Albion? or if you're going maker, an Angus trim or Longship? or KC?
I guess that depends on what you are looking for. In my case, I was looking for unique, historically accurate, handmade reproductions with a high level of craftsmanship and attention to detail. And while I am a collector and not a “practitioner,” handling is important as well. Gael checks all these boxes, at least in the swords I have purchased. The other makers you list check some or all of these boxes to a greater or lesser degree, but without getting into specifics, my impression is that each emphasizes one or two of these factors above the others in the weapons they produce. Not a criticism (I own swords from most of these makers), just a recognition that there are sub-markets in the sword biz. As always, it really gets down to what you value most. I should add that Gael has “levels” starting with the modern steel reproductions for cheapskates like me to swords made entirely from recovered period steel. Check out his website. It does a better job of explaining than I can: www.gaelfabre.com/ |
|
|
|
Post by legacyofthesword on Sept 9, 2022 4:58:56 GMT
Nice! Always been a fan of the Spartan.
|
|
|
|
Post by rannh1 on Sept 9, 2022 12:29:15 GMT
Silly question maybe, but needs asking. What differentiates his work over say an Albion? or if you're going maker, an Angus trim or Longship? or KC?
I guess that depends on what you are looking for. In my case, I was looking for unique, historically accurate, handmade reproductions with a high level of craftsmanship and attention to detail. And while I am a collector and not a “practitioner,” handling is important as well. Gael checks all these boxes, at least in the swords I have purchased. The other makers you list check some or all of these boxes to a greater or lesser degree, but without getting into specifics, my impression is that each emphasizes one or two of these factors above the others in the weapons they produce. Not a criticism (I own swords from most of these makers), just a recognition that there are sub-markets in the sword biz. As always, it really gets down to what you value most. I should add that Gael has “levels” starting with the modern steel reproductions for cheapskates like me to swords made entirely from recovered period steel. Check out his website. It does a better job of explaining than I can: www.gaelfabre.com/Thanks for the reply  That's an interesting perspective. I have pieces of all these makers too, but none of Gael, so I am at a loss when it comes to a comparison. I will look at his pieces and see if something is of interest
|
|
Zen_Hydra
Moderator
Born with a heart full of neutrality
Posts: 2,659 
|
Post by Zen_Hydra on Sept 9, 2022 18:01:31 GMT
...a wizard's staff has a knob on the end... |
|
stormmaster
Member
I like viking/migration era swords
Posts: 7,714
|
Post by stormmaster on Sept 17, 2022 0:35:04 GMT
|
|
|
|
Post by kung on Sept 17, 2022 0:51:40 GMT
whats the handle material?
|
|
stormmaster
Member
I like viking/migration era swords
Posts: 7,714
|
Post by stormmaster on Sept 17, 2022 1:10:58 GMT
for the sword? blond horn and black horn
|
|
|
|
Post by durinnmcfurren on Sept 17, 2022 15:21:52 GMT
Having seen the pictures, while it may not be an exact 1:1 copy of that exact sword, it's definitely about as historically accurate as you can get for swords of that type and period (except of course that the pommel cap doesn't use real garnets). It's a really sweet sword! |
|
stormmaster
Member
I like viking/migration era swords
Posts: 7,714
|
Post by stormmaster on Oct 2, 2022 2:51:20 GMT
White Well Arms poleaxe Tempered high carbon edge, 4 pronged hammer with punched and chiseled decoration. Langets are hooked to secure the head with elaborate terminals. Sturdy que fitted to true grained dyed Ash haft. Specifications; Overall length - 120cm Blade - 13cm Hammer - 6cm Weight - 2.53kg      |
|
|
|
Post by legacyofthesword on Oct 2, 2022 5:14:11 GMT
Extremely sexy poleaxe, my dude.
|
|
Greg E
Member
little bit of this... and a whole lot of that
Posts: 1,354
|
Post by Greg E on Oct 2, 2022 21:53:22 GMT
Bad initial pictures, will take better ones later.
Albion Knud second hand and Albion Steward new from KoA.
|
|
ggower
Member
Posts: 317
Member is Online
|
Post by ggower on Oct 3, 2022 0:09:56 GMT
Incredible score Greg! I've been looking for a Steward forever. Congrats!
|
|
|
|
Post by pellius on Oct 3, 2022 0:53:10 GMT
Great score
I like the Knud. To me, it just feels “right” in the hand, and has perfect proportions.
|
|
stormmaster
Member
I like viking/migration era swords
Posts: 7,714
|
Post by stormmaster on Oct 3, 2022 1:27:57 GMT
Can never go wrong with albion!
|
|
|
|
Post by t0bimaru on Oct 4, 2022 15:38:34 GMT
Purchased from Reliks.com in Canada a Cas Hanwei Banshee sword. This isn't a new sword to most people here and I must have been wanting one for 10 years now, probably longer.      On arrival I was very pleased with the sword overall and it came with Reliks Sharpening Service which (for the cost) I felt was adequately done. Someone proficient in hand sharpening may not be as impressed by the results. I had a diamond steel file I ran over the edge to remove a small burr and it feels extremely sharp overall now. One issue I did unfortunately have was with the scabbard. There was a roughly 9" crack in the bottom of the wood that I wasn't too happy with. I emailed Reliks right away with a photo and a request to possibly replace the scabbard. Within 24 hours I had a reply letting me know they would be in touch with the manufacturer in China about the possibility of a replacement. They asked me for 1 week to resolve the issue which I felt was reasonable. A week later I heard back from Reliks that the replacement scabbard was on the way. They included tracking information. All correspondence from Reliks was timely and professional, in my opinion. The replacement arrived within 3-4 days from Canada and it's in perfect condition with no damage or cracks. Overall I'm really happy with the experience and the scabbard issue I believe was resolved quickly and professionally. The sword itself is well made, straight, and every bit as cool as I anticipated it being. It's ready for some brush clearing, hiking, and potential zombie slaying.  |
|
|
|
Post by BWDuty on Oct 5, 2022 19:12:07 GMT
I'm not really sure what I was expecting with this thing -- I just wanted to add a bit of variety to my collection so I've been looking for a good pollaxe or hammer to add to the swords and axes. All of the swords are Albions, and all of the axes are Arms and Armor. I'd been eyeing the Arms and Armor War Hammer and I was hoping to find one available. One popped up and I sprung on it immediately haha! When it arrived.. oh my God! This thing blows me away. I feel 100% confident that it could do just as much damage as any of my swords, and more against an armored opponent. I did not expect to feel such a sense of presence and command out of such a relatively small piece. It weighs way more than it looks like, and the point of balance is right about where the langets end so just about all of the weight is in the head. I'm not a particularly violent person but I'm sure thinking about looking for some cheap pumpkins after Halloween! It is long enough to get two hands on, but I feel pretty confident that even one-handed it would land absolutely devastating blows. I was kind of worried that when I felt it I wouldn't be confident that it would hold up in battle. Man, I was wrong. It is built like a tank. |
|
|
|
Post by skelley on Oct 5, 2022 23:37:16 GMT
Nothing like a war hammers to get the caveman juices flowing!  I may have to get a second one myself some day. I'm not a particularly violent person but I'm sure thinking about looking for some cheap pumpkins after Halloween! DO IT! Pumpkin slicing and bashing is great! War hammer cleaning is the most annoying though in my experience. I find pumpkin matter finds its ways into all the nooks and crannies between the organic matter and steel. Nothing a toothpick and a close eye can't fix usually but still. On a side note, I've been thinking about ordering one of their Dane axes sometime next year. Those are the type M and L, right? Is there any appreciable difference in the way they feel or handle? |
|
stormmaster
Member
I like viking/migration era swords
Posts: 7,714
|
Post by stormmaster on Oct 6, 2022 0:16:08 GMT
Nothing like a war hammers to get the caveman juices flowing! I may have to get a second one myself some day. I'm not a particularly violent person but I'm sure thinking about looking for some cheap pumpkins after Halloween! DO IT! Pumpkin slicing and bashing is great! War hammer cleaning is the most annoying though in my experience. I find pumpkin matter finds its ways into all the nooks and crannies between the organic matter and steel. Nothing a toothpick and a close eye can't fix usually but still. On a side note, I've been thinking about ordering one of their Dane axes sometime next year. Those are the type M and L, right? Is there any appreciable difference in the way they feel or handle? ive only owned the type M dane axe but it was fantastic, handled great and would recommend, finish could of been better but good for the price, idk about the type L |
|
|
|
Post by Eric Bergeron on Oct 6, 2022 3:05:14 GMT
Type L is a smaller head, I've owned both of the axe types and I like both, it basically is up to what style you like the most to look at.
|
|
|
|
Post by skelley on Oct 6, 2022 3:12:14 GMT
Thank you kindly, gents!
|
|
I may have to get a second one myself some day. 
