Yagoro
Member
Ikkyu in Kendo and Kenjutsu Practitioner
Posts: 1,584
|
Post by Yagoro on Sept 1, 2022 22:38:13 GMT
Today on my kaneie i noticed the saya has a large crack on top of it: Well i can only assume its from yagyu noto, as you turn the saya over and draw it like a tachi. Eventually, the sword is going to cut through its saya and my swordsman days will be over as I will lose all of my fingers. Any way to reinforce this area and prevent that from happening? Attachments:![IMG_20220901_183310090 1.jpg](//storage.forums.net/1694914/thumbnailer/UQiPeQiHZbVeUcFqsdND.png)
|
|
|
Post by paulmuaddib on Sept 2, 2022 13:03:54 GMT
My first thought would be to wrap it with rattan. Would still be traditional and look good. Never done that myself or where you would get the proper rattan. Good luck.
|
|
|
Post by ggolden219 on Sept 2, 2022 16:19:23 GMT
Sealing the crack and then wrapping with rattan or samegawa would be my solution. I'm going to order a few types of rattan to play with for other projects. I'll let you know what I come up with.
|
|
tera
Moderator
Posts: 1,715
|
Post by tera on Sept 3, 2022 17:18:56 GMT
Not at all intended as a negative, but for protecting your hands (and sayas) in the future maybe also investigate the noto technique? In Muso Shinden Ryu, my sensei said that the sword should "float" within the saya during noto. Now, that takes a lot of control and a LOT of practice, but maybe some subtle modification to technique could avoid future issues?
|
|
Yagoro
Member
Ikkyu in Kendo and Kenjutsu Practitioner
Posts: 1,584
|
Post by Yagoro on Sept 4, 2022 1:29:41 GMT
Not at all intended as a negative, but for protecting your hands (and sayas) in the future maybe also investigate the noto technique? In Muso Shinden Ryu, my sensei said that the sword should "float" within the saya during noto. Now, that takes a lot of control and a LOT of practice, but maybe some subtle modification to technique could avoid future issues? One of the issues might be that the nagase is a little large for me. According to the size chart proveded by tozando, I should be using a sword with a 28.5 inch nagasa. This one has a 29.5inch one. Otherwise you are probably correct, i think i am initiating the cut too early
|
|