Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 5, 2008 2:13:56 GMT
wow... i didnt know that the angle grinder had a sanding attachment... now i feel silly, thanks for the help!!!
|
|
|
Post by Matt993f.o.d on Oct 5, 2008 21:44:08 GMT
THOSE tools make the job easier, granted.
I sand all filing marks out by hand, depending on the bevel style I chose. I just use 60 or 80 grit paper. It doesnt take too long.
Angle grinder sanding takes material off fast if you use too coarse a sanding disc. I tried a 50 grit disc after filing on a that hunter I did back along and it proved coarser than my finish filing. I was quite suprised.
|
|