|
Post by wiwingti on Aug 11, 2008 17:05:58 GMT
i wonder what kind and why it would be better than an other. i am looking for mat cutting. because for others cutting i got a table and a pole.
waiting for any suggestions.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 11, 2008 18:17:02 GMT
You could just make one. Here is a list of material for mat cutting 1 4x4 - 28 inches (add that to a 4 foot mat and that gives you 6 ft 6 in total height) 4 2x4 - 18 inches. These are the Legs 12 3 to 4 inch deck screws. 1 stick 1 inch doweling. Cut to about 7 or 8 inches and sharpen one end to a gentle point. 1 1 inch spade bit to boar a 2.5 to 3 inch hold in the 28 inch 4x4 Various grits of Sandpaper Sanding block Some sort of protective wood stain. Gloves, cloth or paint brush to apply the stain. That's the list of materials you will need to do your own stand Ha, I just found a web page that gives step by step instructions for one. Make Your Own Cutting StandThat saves me the work of typing it out. Edit: Also with my stands I have additional sections that go on top of the main stand to give me different heights and also ones with tops for bottles and such.
|
|
|
Post by wiwingti on Aug 11, 2008 20:53:55 GMT
thanks a lot +1 for ya
|
|