|
Post by Insane on Aug 28, 2013 5:34:54 GMT
Maybe not a waki, but the Hanwei Banshee is all you need. Tough as nails with 5160 steel, affordable and nice looking. Great scabbard with lock and multiple carry options. And with the money you safe you can get some Coldsteel machetes for the really dirty work. When it comes to SHTF blades the Banshee is the way to go. kultofathena.com/product.asp?item=PC2126
|
|
|
Post by steelhound on Aug 30, 2013 5:42:45 GMT
The Banshee's a good choice, tough as hell, but I believe it uses high carbon steel instead of 5160. Still a very sturdy blade with a good temper, and proven to be capable of splitting a bullet.
|
|
|
Post by Wanimator on Dec 20, 2013 5:32:14 GMT
The Cold Steel Gladius Machete or Kopis Machete may be well suited for you. I own both and they are pretty nice. Plus their price point leaves room for modifications. Another choice that may be good is from Artificum Solis, www.artificumsolis.com/ProductDe ... ompensator It will go through concrete. Since you are looking for SHTF those came to mind.
|
|
|
Post by Ulrich on Dec 20, 2013 6:03:01 GMT
Have asked that myself for nearly 2 years. Have had 2 Hanwei Tac Wak - with unacceptable issues, have sent 'em back, but still tempted to try a third attempt. End of January my Zakasushi should arrive For 1st world labor I don't think it's expensive, far from it. Edit: Maybe the CRKT Hisshou could be interessting. It's blade is a little bit over 1 shaku, so it's a Wakizashi, isn't it? Mine stucks in Miami since one week, so unfortunatly it won't arrive before X-mas
|
|
|
Post by Sullivan on Dec 20, 2013 9:07:10 GMT
I can tell you the process I used to get this made, it's more of a wakizashi/ko katana inspired machete than a sword, though. It only cost me around 50 dollars and it's through-hardened 1075 steel. Attachments:
|
|
|
Post by jlwilliams on Dec 21, 2013 0:21:55 GMT
Sullivan, I like that.
Have you (the OP) thought about something saber-ish? I have a Cold Steel cutlass machete and I like it. Moves well. Has fair hand protection. Really compares fairly well to a WWI period piece I have. On a related note, I have been casting an eye at the Condor "Bush saber". It also looks like an affordable saber that you could whip some arse with. Not that you likely would, just nice to know you could.
|
|
|
Post by LG Martial Arts on Dec 21, 2013 20:32:20 GMT
I had a couple of CRKT Hisshou that I sold recently, one NIB, the other one I used for (light) cutting/testing. To be honest, they were a little heavier than I was expecting, but they sure were great blades. The one thing I don't particularly like is the lack of a hand guard or choil to prevent your hand from slipping. Don't get me wrong, the tsuka was really well done with same (plastic) and cord wrapped in alternating fashion which was then epoxied to prevent moisture, and provided an excellent grip, but still would prefer if it had even a tiny guard in place. If you do opt for a Hisshou, there were some great sale prices recently, even better than I was able to get them wholesale.
|
|
|
Post by wazikan on Dec 28, 2013 17:00:22 GMT
Who has the hisshou on sale?
|
|
|
Post by LG Martial Arts on Dec 28, 2013 23:56:57 GMT
unfortunately, it looks like the sale prices are long gone... they were being offered for around $160 at KOA, Knifecenter, and BladeHQ a couple of months ago, but prices are back up to at least the $190 mark. PM me if interested in getting a new one... I'll see what I can do.
|
|
|
Post by Ulrich on Dec 30, 2013 13:25:35 GMT
I was also a little bit concerned because the missing guard. I'd prefer one too, but holding it in hand now it feels very comfortable and I think I can live with it as it is. Heavy blade. Must be a decent slasher Unfortunatly I didn't get the sale prices, but 180USD seems to be alright for me, too. Especially when comparing to prices here in Germany...
|
|
|
Post by GoldenDragon on Jan 12, 2014 16:40:18 GMT
I am now thinking about just getting a Tenchi Ko Katana and modifying it to make it more modern and utilitarian...possible duracoat or epoxy...any rejections here?
|
|
|
Post by William Swiger on Jan 12, 2014 16:47:24 GMT
I think that is a great idea. I have converted a few lower end Japanese style swords into a euro hybrid type. Could be done to make a modern looking sword as well.
|
|
|
Post by Glenn Simpson on Jun 27, 2014 1:11:27 GMT
A survival sword should be short enough to carry on your bug out bag and not interfere with the primary weapon, the carbine. Carrying a full sized katana would make your load harder to hump, especially in heavy brush. A wakizashi length or longer tanto (or WW1 bayonet) should be as large as you go. Keep in mind, ALWAYS bring your carbine to the gun fight, sword or not,cause every survival situation where you would need a sword is a potential gun fight
|
|
|
Post by aussie-rabbit on Jun 27, 2014 2:05:52 GMT
Most working tools such as machetes, Parangs and so on tend to be 18 to 22 inches for practical carry, while a Tenchi Ko is a fine idea the cost to then modify will end up being high, why not look at a ZT Zakasushi, ready to go and coated to boot. For $329.95 it's good value. www.zombietools.net/shop/zakasushi/
|
|
|
Post by VicoSprite on Jul 10, 2014 23:42:51 GMT
That's rad! Sell me it! How much? I mean I would like more information please? Lol. I love it, great work. Cheers buddy, Cody
|
|
|
Post by GoldenDragon on Aug 2, 2014 23:12:13 GMT
The Hisshou Looks great! I might pick that one up someday, or make something similar (me and my dad stock remove our own blade designs). Maybe make the blade 14-16 inches though? And definitely have some sort of choil.
|
|
|
Post by Lonely Wolf Forge on Aug 2, 2014 23:27:03 GMT
PM sent
|
|
|
Post by JGonzalez on Aug 3, 2014 0:53:23 GMT
How about a Kershaw Camp 14 or Camp 18? It's long but thorough This guy looks like he knows what he's doing too. www.helmforge.com/EDIT: The man in the video is with HelmForge and his cohort runs Stonehaven Knife Works both are from somewhere near San Antonio, Texas. My apologies for not making that more clear. i'm blaming a 'senior moment' on that one.
|
|
|
Post by GoldenDragon on Aug 3, 2014 1:10:30 GMT
Woah,those look cool. any specs/ opinions on them? Are they durable, like Condor machete's? or just worth the money? Thank you guys for the opinions
|
|
|
Post by JGonzalez on Aug 3, 2014 2:52:42 GMT
If you have about 20 minutes to spare watch that video. It's almost 40 minutes long but these fellas are from Texas which means that once they get to talkin' they don't slow down much. So skipping through won't lose you too much information. He covers the contruction and even removes the handle on the Camp 14 to show the tang and they chop some stuff.
Camp 18 Quick specs: OAL 24" (~61cm) Blade Length: 18" (~45.7cm) Spine thickness: 3/16" (~4.4mm) Weight: 2lb 14oz (~1.3kg)
I've a couple of swords that weigh less than this thing.
good hunting to you
|
|