Ontario Old Hickory Sticker
Jun 21, 2012 5:01:57 GMT
Post by Ramsay318 on Jun 21, 2012 5:01:57 GMT
I have, in the past, found myself in something of a conundrum. I love knife throwing, but I hate the over-designed, paracord wrapped, adjustable weight things that pass as throwing knives. I prefer something that can actually serve as a real knife as well. And, on top of all of that, I must consider costs. But, I think my concerns may be over, thanks to the Ontario Knife Company's Old Hickory Sticker.
IMG_1861.JPG[/attachment]
Specs:
Overall length -- 10.75"
Blade length -- 6.25"
Blade thickness -- .09375"
Blade width -- .9375" at the handle, 1.0625" at its widest
Weight -- 4 oz.
Handle Thickness -- .625"
IMG_1863.JPG[/attachment]
Overview:
This knife has a double-edged, full tang blade of 1095 steel. The handle is made of two hardwood scales held in place by a pair of brass rivets. The blade is rather leaf-shaped, as it tapers out from the handle for about 3/4 of its length, then rounds itself back to the point for the remainder. The handle is somewhat coffin-shaped, tapering out from the top to the butt. This and the octagonal shape makes for a strong grip, but I'd be wary of stabbing anything too hard, since the lack of a guard could shift your grip up the sharpened blade and flay your fingers pretty quickly.
IMG_1870.JPG[/attachment]
Handling:
The balance of this knife is pretty much right at the first rivet, making the blade very quick. On the other hand, with a knife this size and weight, being quick wouldn't be a problem anyway. Every normal grip (hammer, reverse, handshake) feels completely natural, making this a damn fine utility knife on top of everything else.
IMG_1874.JPG[/attachment]
Throwing:
This knife is actually a very good thrower. The blade, though thin, has a strong central ridge, which can support the light weight of the knife. At first I was worried that the point would be too broad to stick, but instead it punches into targets quite well, burying itself about half an inch deep. Because of the balance, it has a very long turning distance. Where other knives this length would turn at probably seven feet, this one takes nine or ten. Just be careful or, better still, dull the edges a little before throwing.
Pros:
Traditional look
Low cost
Can be used as a utility knife
Sturdy construction
Cons:
Thin blade
No sheath
Conclusion:
I really do wish that the blade was a little thicker, but since this is a strong steel and a light knife, I'm not as worried about it snapping any time soon. The handle is utilitarian, but would probably be easy to change out for a more exotic wood if desired. There's no sheath, but won't really be hard to make one from just some scrap leather. Considering this knife only costs between $8 and $12, it's worth a look. I'm planning to get an Apostle's set (dully known as a dozen).
IMG_1861.JPG[/attachment]
Specs:
Overall length -- 10.75"
Blade length -- 6.25"
Blade thickness -- .09375"
Blade width -- .9375" at the handle, 1.0625" at its widest
Weight -- 4 oz.
Handle Thickness -- .625"
IMG_1863.JPG[/attachment]
Overview:
This knife has a double-edged, full tang blade of 1095 steel. The handle is made of two hardwood scales held in place by a pair of brass rivets. The blade is rather leaf-shaped, as it tapers out from the handle for about 3/4 of its length, then rounds itself back to the point for the remainder. The handle is somewhat coffin-shaped, tapering out from the top to the butt. This and the octagonal shape makes for a strong grip, but I'd be wary of stabbing anything too hard, since the lack of a guard could shift your grip up the sharpened blade and flay your fingers pretty quickly.
IMG_1870.JPG[/attachment]
Handling:
The balance of this knife is pretty much right at the first rivet, making the blade very quick. On the other hand, with a knife this size and weight, being quick wouldn't be a problem anyway. Every normal grip (hammer, reverse, handshake) feels completely natural, making this a damn fine utility knife on top of everything else.
IMG_1874.JPG[/attachment]
Throwing:
This knife is actually a very good thrower. The blade, though thin, has a strong central ridge, which can support the light weight of the knife. At first I was worried that the point would be too broad to stick, but instead it punches into targets quite well, burying itself about half an inch deep. Because of the balance, it has a very long turning distance. Where other knives this length would turn at probably seven feet, this one takes nine or ten. Just be careful or, better still, dull the edges a little before throwing.
Pros:
Traditional look
Low cost
Can be used as a utility knife
Sturdy construction
Cons:
Thin blade
No sheath
Conclusion:
I really do wish that the blade was a little thicker, but since this is a strong steel and a light knife, I'm not as worried about it snapping any time soon. The handle is utilitarian, but would probably be easy to change out for a more exotic wood if desired. There's no sheath, but won't really be hard to make one from just some scrap leather. Considering this knife only costs between $8 and $12, it's worth a look. I'm planning to get an Apostle's set (dully known as a dozen).