|
Post by isotop235 on Dec 13, 2011 20:46:46 GMT
I recently tried to clean the blade of my Windlass Maximus Gladius. The blade sliced through the cloth and into my hand. I know, a dumb rookie mistake that paid for in my blood...2 days before it finally stopped bleeding. So now I have a bandaged hand and a sword with grease and blood on it. What products and cloths should one use? I live in the US.
|
|
|
Post by steelhound on Dec 13, 2011 22:04:11 GMT
WD-40 on a paper towel should be good to get the blade clean, and you might just try a dry paper towel first since you already have grease on there. The grease can be a little stubborn, and if you have a cut-resistant glove (like a fisherman's filet glove) it might be a good idea. When you're done cleaning it, I like to take another dry paper towel to the blade to get the rest of the WD-40 off before oiling it. For putting oil back on, an old T-shirt works fine or a clean rag of some sort. I like to keep my oil rag in a plastic bag when I'm not using it to keep dust and pet hair off of it, and mineral oil or Hoppes lubricating oil are good choices.
|
|
|
Post by Adrian Jordan on Dec 13, 2011 22:06:12 GMT
Also, it may be wise to wipe it down with 91% or higher alcohol. It's cuts through grease and dried blood fairly well, and is great to clean blades with.
|
|
|
Post by MuerteBlack on Dec 13, 2011 22:36:40 GMT
I second the >/=91% rubbing alcohol suggestion. Also, to avoid cutting yourself, try palming the cloth and wiping down one side of the blade at a time.
|
|
ecovolo
Senior Forumite
Retired Moderator
Posts: 2,074
|
Post by ecovolo on Dec 14, 2011 7:27:35 GMT
Alcohol works. I've also used Windex with no adverse effects on my blades. I'd recommend either one.
--Edward
|
|
|
Post by isotop235 on Dec 14, 2011 7:34:02 GMT
I could only get 70% Isopryl...no good. I have used a special cleaning towel impregnated with mystical juices from the gun store that is only for cleaning silver, nickel or stainless steel firearms...if one uses it on a blued gun it will remove the bluing. I will try that, but of course I can't find it when I need it. I will try windex tomorrow. Thanks
|
|
|
Post by Adrian Jordan on Dec 14, 2011 8:12:16 GMT
I had to get the 91% from a pharmacy, I couldn't find it at any store. I use it for most cleaning, as it is pretty good at getting grime and that stick stuff from labels off. I think that Windex should work well for now. In the long run, you may want to see if you can lay your hands on some Mothers Mag and Aluminum polish. It is great for cleaning and shining.
|
|
|
Post by isotop235 on Dec 14, 2011 9:39:43 GMT
Will try and locate those products Adrian, thanks.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 14, 2011 14:18:48 GMT
Might also want to wear a glove for safety precaution. (well... I don't) Here's a video on cleaning your blade.
|
|
|
Post by MOK on Dec 14, 2011 14:49:45 GMT
Well, I wear plain old leather work gloves when doing any larger maintenance, or nothing at all for casual cleaning. Even bare hands are safe enough as long as you memorize the key to wiping a blade, and half-swording, for that matter: only apply pressure to the flats, never the edges.
|
|
|
Post by isotop235 on Dec 14, 2011 20:00:50 GMT
Oh yes and that REAL important one....stop wiping when you reach the bone
|
|
|
Post by MOK on Dec 16, 2011 22:05:28 GMT
That's no time to stop wiping, the blade's still all bloody!
|
|
|
Post by Dave Kelly on Dec 16, 2011 22:30:24 GMT
Well on the bright side, Iso, your Windlass movie spatha may be overgrossed, but you can certify it is a killer. :lol:
Penetrating oil works for deposits on the blade, but usually start with just Windex then Mothers Chrome polish. Dry it out and spray it with automotive silicon.
|
|
|
Post by Sir Tre on Dec 17, 2011 7:21:00 GMT
i would recommend kevlar glass handlers gloves for all sword maintenance along with all other safety tips found here
|
|