Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 18, 2011 9:53:00 GMT
I'm wanting to buy my first Gladius with a budget of 200 us. I'm wanting something at least a little functional and sturdy and a little historically accurate. So far I've been looking at the Deepeeka Pompeii AH4211N, and the Windlass Pompeii. Can anyone offer any opinions or maybe another to look at? Thanks!
|
|
|
|
Post by Vincent Dolan on Sept 18, 2011 10:12:13 GMT
Hey, Joe. There's three other options to consider; they're at the top of your budget and not the most historically accurate, but they'll likely be far more functional than the Deepeeka (particularly seeing as it's blunt), though the Windlass received good reviews. For your consideration: The Gen 2 Roman MaintzThe Gen 2 Roman PompeiiThe Valiant Armory PraetorianAnd while it's probably completely historically inaccurate, bu still worth considering is the Windlass Gladiator Sword; member Ric Willy liked this blade quite a bit and joked that he keeps it under his couch to discourage intruders.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 18, 2011 10:21:56 GMT
I looked at the praetorian, very nice. Not priced too high at Kult of Athena but is "backordered" . Kind of leaning toward the Windlass Pompeii, price isn't too bad and looks a little accurate. Unless the Praetorian gets in stock soon. Thank you for the help!,
|
|
|
|
Post by Elheru Aran on Sept 18, 2011 12:54:25 GMT
Check this out... www.larp.com/legioxx/gladius.htmlAt the lower part of the page they have comments on a few production gladiuses. For the most part, lower end production gladiuses are going to be in the 'more or less' category of historical accuracy; however, they'll probably handle just fine and perform okay as long as they aren't wall-hangers or rat-tailed. There are some swords from the Gladiator movie that are coming up on pre-order at Kult of Athena; not the most accurate, but pretty. Worth a look. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 19, 2011 18:01:07 GMT
Think I've settled on the Kris cutlery gladius. Does anyone know of any vendors that have one in stock?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 23, 2011 10:36:43 GMT
Has anyone seen the SOTW Pompeii "Magnus" gladius?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 23, 2011 23:11:07 GMT
Do you mean the SOTW SW012NH Pompeii "MAGNUS" Gladius?. If I am not mistaken, the SOTW pompeii gladius is geared towards reenactment. Therefore if you are looking for a sword for historical accuracy, they are as good as they get for $120. As for functionality, there is a good chance it is unsharpened, and it may or may not be properly tempered. You might want to ask the owner (Rusty) whether the blade is properly tempered. You will need to at least put an edge on the blade before using it for cutting. Also make sure the handle is all nice and tight before using it for cutting. Personally I would fill the handle with epoxy for extra security, and peen the tang for historical accuracy. In short you might need to put in some work to turn it into a functional sword. I see you are also interested in the Kris Cultery gladius. Though more expensive and somewhat less historically inaccurate compared to SOTW gladius, they are well known for their functionality and handling.If you don't mind a little bit of historical inaccuracy, they are some of the best $300 gladius money can buy. You can get them here: www.kriscutlery.com/mm5/merchant.mvc?Screen=PROD&Store_Code=KC&Product_Code=rg&Category_Code=MedievalRight now they are backordered but on average they should have it within a couple of months or so. Good things comes to those who waits.  |
|
|
|
Post by SwordLord on Sept 26, 2011 17:06:52 GMT
I waited months for the Kris Cutlery Gladius to come back in stock and I'm glad I did. I'd say just a tad historically inaccurate (guard metal plate should be inset), but other than that it is spot on with the pompeii style. It's a fantastic sword, so if you can wait I would recommend it. If you are looking for more immediate gratification, then the Windlass is your best bet right now. The SOTW is not tempered nor sharpened for use.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 7, 2011 22:55:08 GMT
I highly recommand Kris Cutlery's gladius. I have one myself and it is a fantastastic sword! When you hold it you feel that you have a sword that can hold up to almost everything. Of all the swords I have(from Darksword Armory, Valiant Armory, some katanas and Albion), its only the Albion that feels better in hand. Kris Cutlery's gladius is a wonderful piece of work and cut extremely well. The only way you can get a better gladius is to buy an Albion...
|
|
|
|
Post by MLanteigne on Oct 9, 2011 17:13:09 GMT
And if you wanted something more historically accurate..probably a half a day's work or less with minimal $ would make that Kris gladius 100% authentic. As it is it's pretty decent looking. But it's a good price for a working cutter that doesn't sacrifice looks.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 9, 2011 18:05:37 GMT
The grip on the KC is glued and would take some effort to remove it, but it can be done. A 100% historically accurate would require a replacement of the ebony guard and pommel with hardwood such as walnut that is finished with linseed oil. The wooden/bone grip should be a tad shorter around 3 1/2" so that the pommel and the guard "locks" your grip when you clench the hilt (I personally prefer the 3 1/4" grip). Almost forget about replacing the thick brass blade with a thinner one that should be recessed into the guard. Lastly the hilt needs to be peened. The KC scabbard's fitting might need a bit of tweaking but I am no expert in it. If one desires an accurate but elaborate pompeii scabbard, one could copy or salvage the brass fittings from Deepeeka's AH4211N (though I doubt it would fit since the blade profile of KC is wider and the KC scabbard is quite thick). Here's some decent information regarding making the production gladius more accurate: www.larp.com/legioxx/gladhnts.htmlStill even without any modification, the KC gladius looks "pretty accurate" compared most production gladius available. |
|
