Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 30, 2010 18:37:22 GMT
I have a thing for too-big/too-long daggers, so this definitely caught my eye. Here's an informal report.... The blade: This is the first blade I've received that I didn't feel the need to touch up the edge(s). Sharp as advertised, with both edges sporting a smooth secondary bevel making a good edge. The blade looks like it was machined as there's no discernible waviness or ripple. Finish is bright and smooth. Basic geometry is flattened diamond with slight hollow grind. No discernible distal taper, but I didn't take my calipers out to check. The blade itself is light and stiff. Too lite IMO. Stiffness may be due to the blade's shortness. POB is about 1.5 inches forward of the grip. The Grip: Made from some sort of dense, hard, foamy man-made material, the shape is long enough for most western hands and comfortable to hold. Proper edge alignment is a breeze. Grip should be durable. The Sheath: The leather is thin splits from pretty good quality hide, constructed with rivets and should be durable. The down side is mine is a REALLY TIGHT FIT. While it comes with a built-in belt loop, I'd prefer a peg ala Arkansas Toothpick. I'm not a blade scholar, but maybe this should be called the "Qama" as the blade isn't curved. Here's Kult's entry. www.kultofathena.com/product.asp?item=402578&name=Cobra+Steel+Kindjal
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 30, 2010 22:48:11 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 30, 2010 23:21:52 GMT
BlackHawk, thank you for letting the community know how this blade feels in hand. I've had my eye on one of these for a little bit now, and now I can put it on my "Blades to Buy" list. I'm not to wild about the sheath tho. It seems like they are mixing old tech with new tech. I'm not a traditionalist by any means, but if they are gonna put a rubber handle on the blade, then the sheath needs to be cordura (sp?)
If/When I get this, I'll probably carve off the handle and put a wooden grip on it.
With that being said, I think this post was probably better suited for the Reviews board. But a +1 to ya nonetheless.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 31, 2010 15:50:20 GMT
Greg, I like the cordura idea. Thanks for the exalt.
Didn't want to do photos, etc., so I decided it would be more appropriate in the general section. Mods, feel free to move.
|
|
SlayerofDarkness
Member
Review Points: 65
"Always give everyone the benefit of the doubt."
Posts: 3,067
|
Post by SlayerofDarkness on Aug 31, 2010 16:01:35 GMT
I dislike the sheath as well. Think about the METAL rivets... with a bit of use, the sharp edge of the blade can push between the pieces of leather and hit the rivets, therefore hurting the blade. I know this for a fact, no maybe's included, unless MRL uses significantly differen materials than I do. That's kinda unlikely, considering it's A, leather, and B, metal rivets. IMO, the only way this sheath design would work well as a long-term solution is if there was a liner of some sort... which wasn't mentioned, and I doubt they would have one. That being said, the knife/sword itself looks VERY interesting; thanks for the psuedo-review! I ma have to pick one of these up sometime, to play around with. -Slayer
|
|
SlayerofDarkness
Member
Review Points: 65
"Always give everyone the benefit of the doubt."
Posts: 3,067
|
Post by SlayerofDarkness on Aug 31, 2010 16:04:28 GMT
Oh, and sorry for the double post, but that IS a kindjal. Almost all kindjals were straight, like 99% of them, from what I've read. The normal MRL 'Kindjal' is rather unusual for the type. HTH. -Slayer
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 31, 2010 18:18:09 GMT
Thanks for the information, Slayer. I wondered why Windlass called it a Kindjal when they also make a Qama that looks more like the Cobra Steel offering.
So the question begs to be asked.... What's the difference between a kindjal and a qama?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 31, 2010 18:23:36 GMT
I just checked that out on wikipedia and both weapons are described as double-edged daggers, similar to the ancient Greek Xiphos and Roman Gladius. Both come from the same part of the world (Georgia, Caucasus). Dunno what's the difference between the two, both seem very, very similar.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 1, 2010 4:18:18 GMT
even at just under one pound, the close POB could be what makes it feel so light... by the way good review. makes me want one.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 1, 2010 6:49:28 GMT
I do like the design of this weapon, looks nice and stabby. Being a southpaw, I especially like that its symmetry makes it quite lefty-friendly. However, I do find it quite surprising that Windlass is now producing blades that come sharp by default.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 1, 2010 7:58:19 GMT
I sent the link for the KoA entry for this to my bro in California, who circumstances and budget have thus far deprived of a sword, and he wrote back "Oooh, I'm getting all tingly inside" so either he wants one of these or he's having a heart attack or a stroke or something.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 22, 2010 22:46:03 GMT
I should have looked a little deeper into the threads before I posted my question on these blades. Thanks for the quick review.
Mine is arriving Friday. I decided to take the plunge. I got the kindjal but if I really like the quality, I may also go for the sickle. I love the full tang on the sickle. I really would like to test these on some green bamboo, if I can figure where I can get some in the San Diego area. If anyone knows, I appreciate the help.
|
|