Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 0:31:02 GMT
Hello all.
I'm DJ Wallace, and I've recently developed a sword addiction. I figured that here, in the company of fellow addicts, I'd find ways to make my addiction worse.
That being said, I still haven't actually purchased my first sword. It sounds odd, but I've been researching very extensively, and I need to do something about my drewl soaked keyboard.
My biggest problem is that, having no prior experience, I don't know what to get first. Its gotten to the point where I can't decide between those classic sword headings "East" or "West."
With that in mind, I've decided to ask a preety straightforward question. What was your first non slo purchase?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 0:49:29 GMT
Welcome aboard, I'm new to the addiction as well. My first was the Darksword Armory 12th Century Medieval Sword, it fit the look and feel I wanted and I like two handed swords. Its not my first choice for some cutting fun due to its weight but I have others for that.
|
|
Avery
Member
Manufacturer/Vendor
"It's alright little brother... There are more!!!
Posts: 1,826
|
Post by Avery on Jul 17, 2010 0:52:34 GMT
Here's a retro-review of my first real sword. Bought it over ten years ago.
/index.cgi?board=swordreviews&action=display&thread=14976
|
|
SlayerofDarkness
Member
Review Points: 65
"Always give everyone the benefit of the doubt."
Posts: 3,067
|
Post by SlayerofDarkness on Jul 17, 2010 0:54:57 GMT
My first was the Hanwei Dark Sentinel... I loved that sword; it was fast, light, and super big. I should, however, mention that mine was a dud that had virtually no edge whatsoever. I sold it a year or so ago to fund other pruchases, but now it's creeping back up my list... I think it's worth getting another one for $85, lol. HTH, Slayer
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 1:00:15 GMT
My first "real" sword was a windlass Irish ring bastard sword which I recently sold here on the forums. It was light, quick, and razor sharp. I was using a doubled over hand towel to wipe the grease that was on the blade when I first got it and it sliced cleanly through it and gave me a nasty cut on my palm. I never even felt the cut it was so sharp lol.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 1:01:01 GMT
I am pretty sure my 1st was the Gen2 gladius. I am still happy with that decision.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 1:29:07 GMT
1st real one was a Masahiro "Tori Tsuba Sword"
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 1:52:11 GMT
The best advice I could give you is to do a ton of research before you buy. While it may be a temptation to buy quantity it's much better to remember not to be penny wise and pound foolish. No matter what you read you really do get what you pay for as far as swords are concerned, at least that's been my experience. Your better off saving up for one really good sword and waiting a year then just buying what you can afford at the moment just so you can have a sharp and pointy right now. What led me to start high end was this...... Right before I purchased my first non wall hanger I had picked up a copy of "The Swordsman's Companion" and "Medieval swordsmanship". All I owned at the time was the LOTR swords from united so I was learning the guards with the ranger sword (NOT very safe). After reading the books I looked in to Atrim and Albion. The first sword I ordered was an Atrim 1430 from All Saints blades, but they we're never to fill the order as the company was shutting down due to the owners health (Unbeknownst to me) So after getting a refund I decided to take a chance on what was a highly recommended company at the time on Myarmoury, Albion. I ordered an Albion Sempach and that was my first real sword. I wasn't disappointed.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 1:54:50 GMT
Haha, I got lucky and bought my first real swords second-hand, so I got a bunch.
First Katana: Hanwei Practical Plus (Got the waki and tanto then too)
First Euro: Hanwei antiqued swept-hilt rapier
There's so many good, affordable swords available on the market now that it's enough to make ones' head spin. I've since sold my PPK and the tanto is dismounted for polishing and customization, but I've left the waki and rapier as-is. Now, I've merely added to the collection, haha.
If you know where to look, you can get some amazing swords second-hand as well.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 1:55:19 GMT
my first sword Albion second generation squire, its still one of my favorite swords.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 2:21:13 GMT
Oh trust me, all I do is research before buying. I think I've read all most every review on the main sword buyers guide site. My problem is that it's opened my eyes to all most every good deal currently in prodouction, which makes it hard to sort through when you want everything.
I don't even have a sword and I all ready have plans for customization. Make sense of that, if you can. Tell me what you come up with.
I've been considering Cold Steel's Grosse Messer, the SBG Custom Pro Katana, the Hanwei Lowlander, and thats just the start of a very long list. I suppose the best thing to do would be buying them all, right?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 2:21:44 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 2:28:02 GMT
I've made 2 posts, and I have to admit, I all ready love this forum.
Its like sharp porn litters every thread.
edit: Reading it again, maybe "true sword" was a bad way to word it. I know historical accuracy varies, and other little factors, I was just playing on the assumption that SLO's where inferior "fakes." New forum jitters, I suppose.
|
|
SlayerofDarkness
Member
Review Points: 65
"Always give everyone the benefit of the doubt."
Posts: 3,067
|
Post by SlayerofDarkness on Jul 17, 2010 2:35:41 GMT
^Ah, so you have discovered the wonders of sword porn, my new friend.... And yes, SBG is a wonderful place; I love it. ;D I personally am not sure that the lowlander would be good as a first sword, because A- it's so freakin' HUGE , and B- it's not entirely functional, having a thinner tang and smaller, hollow pommel than would be reccomended (at least, from what I've read). Good for light cutting? I would feel safe with it, from what I can tell, but nothing strenuous. The GM seems great, if you like the aesthetics and can get over historical innaccuracy, lol... I can't really comment on the SBG Pro, though, except that it looks beautiful but is out of the price range that I'm willing to spend on a katana. -Slayer P.S. Sorry for being off-topic.
|
|
|
Post by kidcasanova on Jul 17, 2010 2:43:58 GMT
Good to see you again Alvin, gotta say I've been jealous of that sword for awhile. It's an absolute beauty. Congrats! ;D
As to the topic at hand, my first sword was one of the 50 dollar Musashi's Paul reviewed a couple years back.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 2:45:29 GMT
My first real sword was a Hanwei Dark Sentinel. I bought it, frankly, because it was inexpensive but also because it was well reviewed. It seemed like a lot of bang for the buck and that's exactly what it is. I've since bought better swords but I'm still pleased with the Dark Sentinel, it's just a heck of a lot of fun.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 2:49:11 GMT
I'm still a big fan of that basket hilt earn.
First sword I bought which "could" be battle ready (but with alot of danger of failing) is the Deepeeka Saxon. But my first SBG inspired purchase was the DSA Gothic (pre-peen). Which is a tought as hell sword, heavy but would make a great warsword. I do kinda wished I had gotten in when they were lighter and peened ........ but hey easy come easy go.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 3:26:56 GMT
Hello, my name is Sir Tre, and I am a sword-o-holic. I haven't purchased a sword in a couple of months now.
all say, "Hi tre, here is your two month coin."
my first, as close as you get to a real sword was a United Black Ikazuchi. (like a cross between a katana and a Han jian).
I prefer jian, but I had a hard time finding a decent one, until i found SBG. Then I heard of Jin-Shi swords... great jian there BTW.
Anyway the Ikazuchi is a 1045 carbon steel, @ 58HRC... decent for $150 USD. well built with 3/4 tang and mekugi pins in handle. solid you might say.
I have quite a few now, my favorite being my Jin-Shi production jian.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2010 3:27:56 GMT
My first real sword was a Hanwei Dark Sentinel. I bought it, frankly, because it was inexpensive but also because it was well reviewed. It seemed like a lot of bang for the buck and that's exactly what it is. I've since bought better swords but I'm still pleased with the Dark Sentinel, it's just a heck of a lot of fun. how is that studded handle bro. is that a fairly good sword to handle in spite of that. it is the only reason i havent got one yet.
|
|
SlayerofDarkness
Member
Review Points: 65
"Always give everyone the benefit of the doubt."
Posts: 3,067
|
Post by SlayerofDarkness on Jul 17, 2010 3:34:23 GMT
My first real sword was a Hanwei Dark Sentinel. I bought it, frankly, because it was inexpensive but also because it was well reviewed. It seemed like a lot of bang for the buck and that's exactly what it is. I've since bought better swords but I'm still pleased with the Dark Sentinel, it's just a heck of a lot of fun. how is that studded handle bro. is that a fairly good sword to handle in spite of that. it is the only reason i havent got one yet. The studs are suprisingly comfortable. I actually REALLY liked them, it made for a comfortable grip that was very secure, especially with the suede grip under the studs. I don't see how they would be a bad thing, except if you just hate how it looks. ;D HTH! -Slayer
|
|