Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 13, 2007 5:59:04 GMT
Hey guys,
I am just wondering if anyone has any good pictures of the agincourt other than the ones on imperial weapons and the other sites with the generic pictures. Specifically i want a better look at the cross guard on this sword as in the generic pictures it looks very flimsy and unlovely. The reason i ask is because if the agincourt is actually 1.5 lbs then it could be just what i am looking for in a sword.
The other thing i would like to know is what the weight of these two weapons actually is, the different sites give different information. Is the norman 3 lbs or is it under 2 lbs? Is the agincourt actually 1.5 lbs?
Thanks guys.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 14, 2007 15:02:02 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 14, 2007 15:31:03 GMT
Hello Clyde,
Once again thankyou very much they answered all my questions except one, would it be possible to get a picture of the width of the blades? Or could you just tell me what the measurements of the edge of the blade are on these swords? Are they a little bit wider than the sharp versions? Or are they much thicker?
Again the information differs on cutting edge cutlery it says that the norman is under 2lbs and on the site you linked me to it says 3, which is right? The agincourt on the site you linked me to says 2lbs 5oz but again CEC says that it is 1lb 5oz. I am guessing the site you linked me to is the accurate one? I am not sure the CEC site is displaying the same swords the site you linked me to are.
|
|
|
Post by manman on Apr 20, 2007 2:28:24 GMT
YES
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 20, 2007 14:14:57 GMT
Hello Clyde, Once again thankyou very much they answered all my questions except one, would it be possible to get a picture of the width of the blades? Or could you just tell me what the measurements of the edge of the blade are on these swords? Are they a little bit wider than the sharp versions? Or are they much thicker? Again the information differs on cutting edge cutlery it says that the norman is under 2lbs and on the site you linked me to it says 3, which is right? The agincourt on the site you linked me to says 2lbs 5oz but again CEC says that it is 1lb 5oz. I am guessing the site you linked me to is the accurate one? I am not sure the CEC site is displaying the same swords the site you linked me to are. I am out right now so I can not measure what you are asking. The blades are not wider, but since they do not taper to an edge, then they are somewhat thicker only where the edge should be. The weights on Cutting Edge Cutlery are the old weights, the new weights are on our site. They do need to update that.
|
|