Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 8, 2009 23:49:20 GMT
I think next time I get a DSA I will get it sharpened the one I have now (Black knight) came dull cause I wanted to sharpen it myself for a lesson in life so Ive spent about 2 nights filing probly like an hour of filing each night Ive gotten it mildly sharp (enuff to cut my fingers a couple times in the process) and then Im gunna belt grind it to excellence once I get my sander
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 2:14:23 GMT
Why would a sword's weight be a valid reason for return? The weights of all DSA swords are clearly listed along with the description and anyone actually reading the description would see the weight. If one then thought a sword was too heavy why would one buy it?
|
|
SlayerofDarkness
Member
Review Points: 65
"Always give everyone the benefit of the doubt."
Posts: 3,067
|
Post by SlayerofDarkness on Dec 9, 2009 2:44:56 GMT
Maybe it was the handling... I just remember that Ebon wasn't pleased with it, and Eyal gave him great service in the return. I -believe- that it was due to handling/percieved wieght, but I may well be wrong. -Slayer
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 11:06:10 GMT
Why would a sword's weight be a valid reason for return? The weights of all DSA swords are clearly listed along with the description and anyone actually reading the description would see the weight. If one then thought a sword was too heavy why would one buy it? DSA sword weights used to be much higher than listed on their page. Not anymore though.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 15:25:13 GMT
Why would a sword's weight be a valid reason for return? The weights of all DSA swords are clearly listed along with the description and anyone actually reading the description would see the weight. If one then thought a sword was too heavy why would one buy it? The weights listed were approximations and on some of his pieces, no weight was listed. Keep in mind, I'm going back a few years, 2006 maybe, before Eyal or I were ever members on this site. I'd bought the then-new Ranger sword, which had no weight listed for it initially; mine was 47" OAL, with a 36" blade no distal taper and weighed in just over 5lbs- now for some, this would have been ideal, that is, I'm sure someone somewhere would've loved this sword but I didn't. Eyal picked up on that and offered to do a refund as opposed to me finding something else in his inventory (at the time, ALL of their swords were built the same, heavy blades, heavy fittings, fat handles and generally overweight as far as historical accuracy were concerned). Since then, they've diversified their lineup and put out several new models which seem to be closing the divide that DSA used to be known for. So, mogur, to answer your question, I bought this sword w/out knowing its weight- had I known, I wouldn't have. Slayer, thanks for the explanation on my behalf, it was more or less on the money, w/the exception of the timeline but you couldn't have known that as I never really expressed it. You're the man!
|
|
SlayerofDarkness
Member
Review Points: 65
"Always give everyone the benefit of the doubt."
Posts: 3,067
|
Post by SlayerofDarkness on Dec 9, 2009 17:48:08 GMT
Aww, shucks, jus' doin' me duty, misser Ebin. lol, thanks, man. Just trying to help; sorry for putting words in your mouth. -Slayer
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 18:21:35 GMT
Why would a sword's weight be a valid reason for return? The weights of all DSA swords are clearly listed along with the description and anyone actually reading the description would see the weight. If one then thought a sword was too heavy why would one buy it? The weights listed were approximations and on some of his pieces, no weight was listed. Keep in mind, I'm going back a few years, 2006 maybe, before Eyal or I were ever members on this site. I'd bought the then-new Ranger sword, which had no weight listed for it initially; mine was 47" OAL, with a 36" blade no distal taper and weighed in just over 5lbs- now for some, this would have been ideal, that is, I'm sure someone somewhere would've loved this sword but I didn't. Eyal picked up on that and offered to do a refund as opposed to me finding something else in his inventory (at the time, ALL of their swords were built the same, heavy blades, heavy fittings, fat handles and generally overweight as far as historical accuracy were concerned). Since then, they've diversified their lineup and put out several new models which seem to be closing the divide that DSA used to be known for. So, mogur, to answer your question, I bought this sword w/out knowing its weight- had I known, I wouldn't have. Slayer, thanks for the explanation on my behalf, it was more or less on the money, w/the exception of the timeline but you couldn't have known that as I never really expressed it. You're the man! Hi Ebon, thank you for your answer. If i understand you correctley your return of the Ranger sword was 3 years ago, right? Hmm.....i have hoped to track one down. I like the look of this sword. As you may know i have a fable for the LotR Ranger sword. It is a very attractive sword and DSA has captured the look of the movie sword quite well. Maybe i am luck y another time....... Thank you. Best wishes, Meschler
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 21:56:38 GMT
I just received my two handed war sword from DSA, which I ordered sharpened. The edge was nothing to write home about, but functional for cutting heavy targets. It was a secondary bevel, but not hollow ground. It didn't do well against lighter bottles, 1/2 tearing them, 1/2 batting them. Some of that is very likely me. I am sure a skilled cutter could make it work. Since the edge was already 3/4s of the way there, it might very well be worth the money just to save 2 hours of maddening fill work against the hard steel. The file bites, but just.
The free scabbard upgrade, free shipping and excellent service would make me recommend them in a second. The sword it self is solid, well made and feels quite lively.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 22:01:20 GMT
You got the 2-handed warsword eh? C'mon, let's have that review! I'm super curious about that one!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 22:48:58 GMT
i love AoV, but the black knight sells for $145 in the DSA store and nearly $300 in the AoV one... You could get the one from DSA and spend the difference on a HF 1X30 belt sander and some belts, watch Tom's sharpening videos and do it yourself. The learning curve isn't real big but from what I've heard of DSA, you'd have to start at a lower grit and work up. May take some time. However, once you have it down, getting and keeping your blades sharp will never be a problem again. Thats the choice I made I get my belt sander next week YAY !
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2009 22:55:36 GMT
I just received my two handed war sword from DSA, which I ordered sharpened. The edge was nothing to write home about, but functional for cutting heavy targets. It was a secondary bevel, but not hollow ground. It didn't do well against lighter bottles, 1/2 tearing them, 1/2 batting them. Some of that is very likely me. I am sure a skilled cutter could make it work. Since the edge was already 3/4s of the way there, it might very well be worth the money just to save 2 hours of maddening fill work against the hard steel. The file bites, but just. The free scabbard upgrade, free shipping and excellent service would make me recommend them in a second. The sword it self is solid, well made and feels quite lively. when did you get this?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2009 14:47:31 GMT
I keep intending to get a review up. Seems I waited to long, its now cold and snowy out so y'all will have to wait until a nice sunny, warmish, day.
|
|