|
Post by mountainsylph on Mar 4, 2022 15:32:53 GMT
So I would mean for both tin bronze and forms of aluminum bronze (Such as C95500 which some have said is the best form that can be used for a blade of any kind).
Somebody mentioned and recommended this tool last time. Would it also be as good as the sharpening service that some sword shops give though?
|
|
|
Post by eastman on Mar 5, 2022 3:45:55 GMT
I don't see a reason why it wouldn't work, but it will give you a secondary bevel at the AccuSharp cutter angle (if that is important to you)
|
|
|
Post by mountainsylph on Mar 8, 2022 11:45:25 GMT
I don't see a reason why it wouldn't work, but it will give you a secondary bevel at the AccuSharp cutter angle (if that is important to you) As in a second cutting edge that stands apart from the original?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 8, 2022 23:31:46 GMT
I don't see a reason why it wouldn't work, but it will give you a secondary bevel at the AccuSharp cutter angle (if that is important to you) As in a second cutting edge that stands apart from the original? Yes. And it is very uneven, at least in my experiences
|
|
|
Post by eastman on Mar 9, 2022 2:02:52 GMT
As in a second cutting edge that stands apart from the original? Yes. And it is very uneven, at least in my experiences
when using the AccuSharp to put an edge where none existed before it can be effective, but it won't be a clean shiny edge.
It will not impress Doug Marcaida, but it would be sharp enough to put the hurt where it needs to.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 9, 2022 5:30:39 GMT
Yes. And it is very uneven, at least in my experiences
when using the AccuSharp to put an edge where none existed before it can be effective, but it won't be a clean shiny edge.
It will not impress Doug Marcaida, but it would be sharp enough to put the hurt where it needs to.
I have a few, I like to use them to put an edge on a blade that has no edge, then rounding it off with a file and stone. It's a good way to help me get there
|
|
stormmaster
Member
I like viking/migration era swords
Posts: 7,647
|
Post by stormmaster on Mar 9, 2022 8:23:46 GMT
I dont think it would work as a bronze swords edge is very different and not about grinding like a steel sword edge but rather hammering it in
|
|