|
Post by uzitm on Jul 20, 2021 17:36:27 GMT
|
|
|
Post by randomnobody on Jul 20, 2021 17:53:24 GMT
Nice. Forgive me if I'm mistaken, but if the blade blued? Or is the stark-white background playing tricks on my eyes?
|
|
|
Post by uzitm on Jul 20, 2021 18:29:01 GMT
Nice. Forgive me if I'm mistaken, but if the blade blued? Or is the stark-white background playing tricks on my eyes? it has shades of blue. but the shades change depending on the light. the blade has a mirror finish after that i used ballistol. because of this there are reflections on the blade
|
|
|
Post by Murffy on Jul 20, 2021 19:02:42 GMT
That's a wicked blade. What's the weight and length of it?
|
|
LeMal
Member
Posts: 1,012
|
Post by LeMal on Jul 20, 2021 19:03:35 GMT
Beautiful.
|
|
|
Post by randomnobody on Jul 20, 2021 19:18:11 GMT
Nice. Forgive me if I'm mistaken, but if the blade blued? Or is the stark-white background playing tricks on my eyes? it has shades of blue. but the shades change depending on the light. the blade has a mirror finish after that i used ballistol. because of this there are reflections on the blade Cool, that makes sense. Thanks for clearing it up. I'm with the others, what are the measurements (length, weight, etc)?
|
|
|
Post by uzitm on Jul 20, 2021 20:22:19 GMT
Length 80 cm. Weight 914 g. I have had problems with heat treatment in the past for blades with a T-section. that's why I didn't make the blade thinner
|
|
|
Post by randomnobody on Jul 20, 2021 20:52:16 GMT
Length 80 cm. Weight 914 g. I have had problems with heat treatment in the past for blades with a T-section. that's why I didn't make the blade thinner A bit heavy but not unreasonable. I'm a fan of T-section blades, so I'm curious: How do you make yours? Vice?
|
|
LeMal
Member
Posts: 1,012
|
Post by LeMal on Jul 20, 2021 21:38:19 GMT
Length 80 cm. Weight 914 g. I have had problems with heat treatment in the past for blades with a T-section. that's why I didn't make the blade thinner A bit heavy but not unreasonable. I'm a fan of T-section blades, so I'm curious: How do you make yours? Vice? I'd say not bad at all, by my calculations, if the POB is under 7.5". What is the POB by the way?
|
|
|
Post by treeslicer on Jul 20, 2021 23:09:18 GMT
Very impressive.
|
|
|
Post by uzitm on Jul 21, 2021 7:58:21 GMT
A bit heavy but not unreasonable. I'm a fan of T-section blades, so I'm curious: How do you make yours? Vice? I'd say not bad at all, by my calculations, if the POB is under 7.5". What is the POB by the way? I forgot exactly where POB is. I'm going to ask the friend I made the sword for.
|
|
|
Post by uzitm on Jul 21, 2021 8:00:50 GMT
by the way .... I don't know what a Turkish sword knot looks like. The one I made is European
|
|
|
Post by pellius on Jul 21, 2021 15:20:50 GMT
Very cool
|
|
|
Post by uzitm on Sept 23, 2021 9:38:14 GMT
Hi friends. I cut some clay with pala
|
|
|
Post by randomnobody on Sept 23, 2021 10:02:16 GMT
Cutting clay? Interesting; first time I've seen that.
Only watched a few seconds of the video, as I'm at work, but I'll finish when I get home. Looks like it does well so far.
Still a really, really nice looking sword.
|
|