|
Post by albrill71 on May 3, 2021 18:25:11 GMT
Hey guys, old fart newbe, here. I’ve been scouring the web, looking for a nice short, fast sword, like a wakizashi, that is made for use, not looks. Seems like T10 would be a good material. All I see is fancy cosmetic stuff. What’s out there, that is plain, quality and built for battle. Not that I NEED it, but I’d love to have it. There are a lot of showy blades to be had, but I have no love of glitter. Any ideas or knowledge I can glean here will be much appreciated. Thanks!
|
|
AJGBlack
Member
"This world will stress you like Orson Wells on the radio." -RTJ
Posts: 368
Member is Online
|
Post by AJGBlack on May 3, 2021 18:34:02 GMT
What level of decoration do you consider glitter? Are you attached to the idea of t10? If not: The hanwei practical wakizashi it plain, utilitarian piece. Only around $200 and fun. If t10 is a must, then most of the available blades on the market will have a bit more glitz and cost about double.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2021 18:47:09 GMT
|
|
|
Post by Sir Thorfinn on May 3, 2021 19:52:03 GMT
Sounds like you need a Kukri,
|
|
tera
Moderator
Posts: 1,601
|
Post by tera on May 3, 2021 20:33:34 GMT
I might also mention the category of "ko-katana". Basically a wakizashi blade length with katana length tsuka (in many cases). So, short but option of two handed grip for more control.
|
|
|
Post by paulmuaddib on May 3, 2021 21:44:48 GMT
Going to add my 2 cents in and say take a look at tactical wakizashi. No more utilitarian blades on the market imo. I own several and love them. But all the suggestions that have been given are good ones.
|
|
|
Post by Murffy on May 3, 2021 22:02:27 GMT
I have the Hanwei Raptor wakizashi. Tough as nails and a good cutter. It's through-tempered 5160 but from reading this forum I'm not sure T10 offers any significant advantages. Although, right now, the Raptors are hard to find. Much easier to find would be a kukri or other blade from Great Gurkha Kukri. Again 5160 but differentially tempered. They're inexpensive, very well made and extremely sharp, and it actually doesn't take too long to ship to the U.S. The head smith of the outfit is getting a good reputation here as a custom sword/knife maker.
|
|
|
Post by gwynbleid on May 4, 2021 0:23:24 GMT
|
|
|
Post by gwynbleid on May 4, 2021 0:24:41 GMT
btw you're getting this comment here specifically cause after you've being an aggressive xxxxx, you blocked me.
|
|
|
Post by albrill71 on May 4, 2021 1:19:16 GMT
|
|
|
Post by albrill71 on May 4, 2021 1:25:29 GMT
T10 is not a must at all. 1095 is great. Seems no one is using it much except a few. 1055 seems popular with CS. The tactical wakizashi is on the possibles list. A bit thin, though. Plain Jane is preferred. I don’t need anything fancy, but what’s the most utilitarian blade in this format for about $100? Practical user for survival defense, and won’t let you down?
|
|
|
Post by albrill71 on May 4, 2021 1:43:52 GMT
Cold steel 1055... anyone ever break, chip or warp it with normal use, or against another weapon/object? I don’t plan on chopping bricks, pipe or trees, but I’d just like to know what it stands up to. In a pinch, anything is better than nothing, I guess. I suppose I could put it to the test at those prices too. The Tac/Washi isn’t very high.
|
|
|
Post by nebulatech on May 4, 2021 3:33:56 GMT
Cold steel 1055... anyone ever break, chip or warp it with normal use, or against another weapon/object? I don’t plan on chopping bricks, pipe or trees, but I’d just like to know what it stands up to. In a pinch, anything is better than nothing, I guess. I suppose I could put it to the test at those prices too. The Tac/Washi isn’t very high. Many years ago, perhaps 10, I bought a Cold Steel folding kukri type blade. I think it was called the Spartan. Broke the tip on day 1. I do still carry a Cold Steel folder daily, and I cut everything with it, shave aluminum, cut wire, stab sheet metal, and it has held up well, though with my constant abuse, it requires frequent sharpening. I don't own any CS swords, but just keep in mind that CS doesn't make their swords, so you're paying premium just for convenience. I didnt personally like the weight or balance of the Warrior series when I handled one about 5 years ago, but I'm not trained in Japanese blades, so that's just a personal feeling. I own 2 ww2 era katanas and I like their feel better. YMMV, just consider that CS, at least new, is much more expensive than many other options, possibly from the same forge. At least with a CS blade, you can probably get it in less than a week. I know there are many CS owners here, so I hope I haven't offended anyone. I own about 10 CS fixed blade knives, 4 folders and a blow gun.
|
|
|
Post by paulmuaddib on May 4, 2021 11:08:08 GMT
|
|
|
Post by paulmuaddib on May 4, 2021 11:16:42 GMT
T10 is not a must at all. 1095 is great. Seems no one is using it much except a few. 1055 seems popular with CS. The tactical wakizashi is on the possibles list. A bit thin, though. Plain Jane is preferred. I don’t need anything fancy, but what’s the most utilitarian blade in this format for about $100? Practical user for survival defense, and won’t let you down? CS machetes are thin because they are machetes not swords. I own three and they are ok for what they are but not what I would grab first for defense (that would be my pistol but you may not have that option). I’m not saying they couldn’t be used defend yourself. They absolutely could I just think they’re bit unwieldy. All my tactical wakizashi are much better for that application. And some are just a bit over $100 new.
|
|
|
Post by albrill71 on May 4, 2021 12:03:51 GMT
I have experienced the feel of a Japanese WW2 non commissioned officers sword. They were manufactured, but seemed very good quality. Wouldn’t mind a Waki in that class, for sure. Very hard to find. I will probably find myself settled on a shorter tac blade. Was looking for at least 18” blade, but may have to go shorter. There are some great blades out there in 10-12”, but I’ve got a lot of hunting/fighting knives.
|
|
pgandy
Moderator
Senior Forumite
Posts: 10,296
|
Post by pgandy on May 4, 2021 12:44:19 GMT
Sorry to have modified your posts Paul but your reference has been censored out and no longer exist.
|
|
|
Post by Adventurer'sBlade on May 4, 2021 14:59:49 GMT
The APOC swords are exactly what you're looking for. A little more than $100 but not much. A Honshu wakizashi's not a bad choice to play around with for $100 either.
If you're ok with a single handed short sword, check out my APOC yataghan review. Or the APOC brutus for a double edged option.
I also have a Condor Yoshimi. That one's about Wakizashi sized and it's all business. A very thick convex edge but it is extremely nimble and tough.
|
|
|
Post by kjakker on May 4, 2021 20:16:56 GMT
|
|
pellius
Moderator
Posts: 5,165
Member is Online
|
Post by pellius on May 4, 2021 20:42:34 GMT
Regarding fast short swords, I have a few wakizashi as well as a few Filipino short swords. If you do consider a Filipino style sword, I’ve found the TFW Moro Janap to be light enough (about 14oz) to be very fast and maneuverable, but forward balanced enough to be authoritative in the cut. The cross section geometry is also very good for cutting. Imho, TFW has improved the looks a little since KoA took its photos, darkening the wood a bit and giving it a plunge line that gracefully continues the curve of the ridge line. Admittedly, it’s not like a wak, though. www.kultofathena.com/product/moro-janap/fwiw.
|
|