Post by William Swiger on Jun 27, 2014 15:38:06 GMT
Dragon Viking Sword Prototype by Jeffrey Robinson:
Overall length: 37 1/2 inches
Blade length: 31 inches
Blade width at base: 2 inches
Blade thickness: .183 inch tapering to .129 inch
Cross width: 5 1/4 inches
Grip length: 3 1/2inches
POB: 5 3/4 inches
Weight: 3 1/4 pounds
Type X: Oakeshott describes the Type X as: "A broad, flat blade of medium length (average 31") with a fuller running the entire length and fading out an inch or so from the point, which is sometimes acute but more often rounded. This fuller is generally very wide and shallow, but in some cases may be narrower (about 1/3 of the blade's width) and more clearly defined; a short grip, of the same average length (3 3/4") as the Viking swords. The tang is usually very flat and broad, tapering sharply towards the pommel. The cross is narrower and longer than the more usual Viking kind--though the Vikings used it, calling it "Gaddjhalt" (spike-hilt) because of its spike-like shape. Generally of square section, about 7" to 8" long, tapering towards the tips. In rare cases curved. The pommel is commonly of one of the Brazil-nut forms, but may be of disk form."
Type X features a blade that is broad and massive at the base and features a moderate taper towards the point. Sometimes the point may be of a rounded or slightly more acute profile. This type of point would have been fairly effective when used against the lightly armored warriors of the Viking and early Middle Ages. Regardless of the point's profile, the Type X is definitely a sword oriented towards the cut. The blade typically features a lenticular cross-section that is very flat and relatively thin. Its breadth is countered by the use of a fuller that is typically broad and runs nearly the entire length of the blade. The end result is a blade that is massive in proportion yet lively in its handling characteristics. The Type X would have been capable of large shearing cuts that would have provided a decisive conclusion to any encounter. Against the mail clad warriors of its day, the Type X would have given good service.
General Sword Information From Jeffrey Robinson: This sword has a blade from the Albion moat sale. The blade has been re-finished, the tip has been re-shaped, and it has been sharpened. It is marked Deltin on one side and has the Albion special edition mark on the other. The guard is banzaipeened to the tang and the pommel is keyed, hot peened, and banzaipeened to the tang. The grip is a wood core with a leather wrap.
Impressions: Excellent fantasy Viking sword. The design of the pommel and guard are exceptional. Grip wrap is well done. Blade was finished to a high level. Sword is slightly weighty but very easy to manage. I have bought 3 swords from Jeffrey with two of them being prototypes which were excellent bargains for what you are getting. Jeffrey can customize just about any blade you might want to use these fittings on. All my transactions with Jeffrey were very smooth and he is a great artist to deal with. I have sold this sword to another forum member.
Pros: His prototypes when offered are excellent value. Nice sword at a very fair price.
Cons: Can be heavy for some. Some sharpish edges on the bronze fittings.
References:
BRONZE By Jeffrey J. Robinson
Sword in the Age of Chivalry, The, by R. Ewart Oakeshott
MyArmoury