SwordNArmory 1060 Forged/Folded Wakizashi
Oct 29, 2011 2:32:53 GMT
Post by KuroOkami on Oct 29, 2011 2:32:53 GMT
Introduction
As seen here: www.swordnarmory.com/Handmade-Fo ... d-9053.htm, this was a pretty interesting sword to look at, and after I sold my Ryumon Murasaki Wakizashi… I needed another to complete my Daisho again. And this sword fit the bill. A Differential Harden AND Folded Blade? Why not! With some minor shipping delays due to stock being rusted, it took a while to get to me, but man, was I glad to get it!
It came in a plain old box and Styrofoam. But it did come with a Cleaning kit and Sword bag. I must say, when I first pulled it out of its bag I was impressed.
The Low-Down
Here’s The Spec’s:
• Total Length: 28.75”
• Nagasa: 19.5”
• Tsuka Length: 8.125”
• Sori: 0.2”
• Saya Length: 20.5”
• P.O.B.: 3.5”
• Tsuba Material: Iron
• Fuchi/Kashira Material: Copper Alloy
• Ito/ Sageo Material: Cotton
“Well, Well…” I thought to myself as I examined my new Wakizashi… Although I do not know who manufactures this sword (maybe just a SwordNArmory Sword?), it is not too horribly done! The thing that attracted me to this blade the most was the blade: 1060 Folded/Differentially Harden Steel. Is it historically accurate for a Japanese Sword? So-So, as it does, in fact, have a Gunome Hamon, although very hard to see in certain lighting conditions. The folds are plainly visible, and are very attractive. The only downside to this blade is the horribly done Kissaki (typical, right?) Other than that, no other issues.
The Tsuka was better than the Tsuka displayed on the pictures on the website. It is longer then normal Tsuka (that is 6.5”, this has 8.125”) The Diamonds were very even, although the Omote and Ura Knots were reversed. The Ito was very tight, and the Menuki are Kumo (Spider) Themed (could be wrong but it does look familiar). The Samegawa is pretty decent also. Dismantling the sword though, I found some slight issues. The Tsuba is made of iron, so I am actually not surprised to find some rust, but the nakago-ana? Ouch. That could cause problems later. The Tsuka was also splitting a little, but nothing a little glue can’t fix (or would have been fine because the tight wrapping job with the tsuka-Ito). Another small issue was the Samegawa Panel on the Ura Side was composed of 3 separate panels, but wasn’t visible with the Ito. But my biggest issue was the Kashira: Way Too Uneven. Still, nothing that can’t be fixed!
Cutting Performance
Probably the one thing everybody wants to know… It is pretty damn light and fast, I am able to do basic techniques without a problem. This Wakizashi can handle Light and medium targets, but might have trouble with heavier targets, so I wouldn’t recommend it.
Conclusion
This Wakizashi is amazing, and defiantly worth the money. With a Folded/Differential Harden Blade and Above-Average Fittings, at only $110, you might have a hard time finding something to compare to this. The only downsides are the common Quality Control issues that most Mass-Produced Swords have.
Pros:
-Differential Harden/Folded Blade
-Above Average Fittings
-Functional Dojo Cutter
Cons:
-Quality Control Issues
-Unknown Manufacturer
Bottom Line
I would recommended this to anybody looking for a Good Wakizashi Blade. It’s Attractive and Functional, and is Available for $109.98 at SwordNArmory!
As seen here: www.swordnarmory.com/Handmade-Fo ... d-9053.htm, this was a pretty interesting sword to look at, and after I sold my Ryumon Murasaki Wakizashi… I needed another to complete my Daisho again. And this sword fit the bill. A Differential Harden AND Folded Blade? Why not! With some minor shipping delays due to stock being rusted, it took a while to get to me, but man, was I glad to get it!
It came in a plain old box and Styrofoam. But it did come with a Cleaning kit and Sword bag. I must say, when I first pulled it out of its bag I was impressed.
The Low-Down
Here’s The Spec’s:
• Total Length: 28.75”
• Nagasa: 19.5”
• Tsuka Length: 8.125”
• Sori: 0.2”
• Saya Length: 20.5”
• P.O.B.: 3.5”
• Tsuba Material: Iron
• Fuchi/Kashira Material: Copper Alloy
• Ito/ Sageo Material: Cotton
“Well, Well…” I thought to myself as I examined my new Wakizashi… Although I do not know who manufactures this sword (maybe just a SwordNArmory Sword?), it is not too horribly done! The thing that attracted me to this blade the most was the blade: 1060 Folded/Differentially Harden Steel. Is it historically accurate for a Japanese Sword? So-So, as it does, in fact, have a Gunome Hamon, although very hard to see in certain lighting conditions. The folds are plainly visible, and are very attractive. The only downside to this blade is the horribly done Kissaki (typical, right?) Other than that, no other issues.
The Tsuka was better than the Tsuka displayed on the pictures on the website. It is longer then normal Tsuka (that is 6.5”, this has 8.125”) The Diamonds were very even, although the Omote and Ura Knots were reversed. The Ito was very tight, and the Menuki are Kumo (Spider) Themed (could be wrong but it does look familiar). The Samegawa is pretty decent also. Dismantling the sword though, I found some slight issues. The Tsuba is made of iron, so I am actually not surprised to find some rust, but the nakago-ana? Ouch. That could cause problems later. The Tsuka was also splitting a little, but nothing a little glue can’t fix (or would have been fine because the tight wrapping job with the tsuka-Ito). Another small issue was the Samegawa Panel on the Ura Side was composed of 3 separate panels, but wasn’t visible with the Ito. But my biggest issue was the Kashira: Way Too Uneven. Still, nothing that can’t be fixed!
Cutting Performance
Probably the one thing everybody wants to know… It is pretty damn light and fast, I am able to do basic techniques without a problem. This Wakizashi can handle Light and medium targets, but might have trouble with heavier targets, so I wouldn’t recommend it.
Conclusion
This Wakizashi is amazing, and defiantly worth the money. With a Folded/Differential Harden Blade and Above-Average Fittings, at only $110, you might have a hard time finding something to compare to this. The only downsides are the common Quality Control issues that most Mass-Produced Swords have.
Pros:
-Differential Harden/Folded Blade
-Above Average Fittings
-Functional Dojo Cutter
Cons:
-Quality Control Issues
-Unknown Manufacturer
Bottom Line
I would recommended this to anybody looking for a Good Wakizashi Blade. It’s Attractive and Functional, and is Available for $109.98 at SwordNArmory!