Hanwei Solingen Rapier
Oct 1, 2010 3:26:33 GMT
Post by Sean (Shadowhowler) on Oct 1, 2010 3:26:33 GMT
Review of the Hanwei Solingen Rapier -- Sean O. Stevens --
Grovetown, GA. U.S.A.
I love rapiers... LOVE them. My first experience with any sort of sword was fencing with my father. Those are some of the very few good memories I have of him... so maybe thats part of why I love rapiers so much. Or Maybe it was 'The Princess Bride' that did it to me. Either way, I have always had a soft spot for these elegant weapons.
I purchased this Hanwei Solingen from Hutchinsons Militaria (ebay). They are (as Paul mentions in the buyers directory, one of few Ebay vendors you can trust without worry. I've bought a couple swords from them, and it's been a great experience each time.
I was SO excited to get my hands on this one, I forgot to photo the box and packaging. Rest assured tho, future reviews I will (attempt) to remain calm and do so. Everything was boxed and wrapped very well, the sword arrived with no damage or issue, well protected and greased up.
Blade length: 36 5/8
Overall length: 45 1/4
Weight: 2lb 5oz
Width at Guard: .75
Width at Tip: .40
Thickness at Guard: .25
Thickness at Tip: .10
The Blade
Everything disassembles on this (and all, if I'm not mistaken, all) Hanwei rapier. The blade is a very narrow, flexible 4 pointed star shape. It's very abnormal if your not used to rapiers... it seems almost hollow ground. It's formed much like a stiletto. It's not sharp on the edge, it's all about thrusting.
As you can see, the tang is threaded. Hanwei sells blunt blades, and replacement blades, which is actually really cool. That means you can practice and fence with the same setup, and keep a live blade in it when not fencing. Damage a blade... replace it. Spare blades are decently affordable also... they tend to run around 40 - 50 bucks.
I've handled rapiers before that had a more normal, wider and flatter blade that was better for keeping an edge along it's whole length. This one is much more of a dedicated thruster. This is not to say you could NOT give it an edge along it's length, but it would be tricky with so little space to work with. I may try it later, if my sharpening skills improve, because I like to deliver thrust-cuts with a rapier.
There was a little burr at the tip of the blade... I have read from others this is common with the Hanwei rapiers. I took it out no problem with a file, nice and smooth now. And POINTY!
The Grip
Pretty small... a tight fit for my giant paws. It feels good in hand, but for me something just a TAD bigger would be better. If you have large mitts, keep this in mind.
The core is made of plastic, wrapped in wire. I'm not thrilled about the plastic... I'm sure it's durable, but I just don't like plastic in my swords.
The Pommel
Sorry, blurry pic. The pommel isn't overly exciting anyway... it's like a cubed-oval. It has some heft to it and does it's job, keeping your hand in place and transferring some weight behind your hand for better, quicker handling.
The Guard
Simple yet elegant... not overly ornate but still a bit more involved then some more basic guards I have seen. A Good balance, and I like it... one of the reasons I chose this one. It's made from Stainless steel, so you don't have as much upkeep with the guard as with the blade itself.
The scabbard
VERY basic. Some kinda synthetic (fiberglass like many of Hanwei's products?) with a rubber material at the mouth. Covered in black leather. Basic and functional, nothing to write home about. The sword sits loosely in the scabbard and would fall out if tilted downward. Also, being a synthetic, it makes that 'Schhhhing!' sound when drawn that everyone is talking about lately. ;D
Cutting
Well, didn't do any, doesn't have any edge to speak of. I may, as I mentioned, change this later. If I do I'll do some thrust-cuts... and update.
Thrusting
Ah! What a rapier is BUILT for. See for yourself.
It tracks well in hand... but not the BEST. I tried on smaller bottles (20oz) a couple times off camera and missed 2 out of three times from a lunge-thrust. Could be I'm rusty... actually, I KNOW I'm rusty.
The Solingen handles well, is light and flexible as a rapier should be, and has a well tempered flexible blade.
Conclusion
So, in the end, I think this sword is one of the best options in it's price range for this sort of sword. The plastic bothers me... but thats a little thing and you only noticed it when you disassemble the sword. The option to mount blunt blades and get replacement blades is VERY handy and a great feature. The handling and look of the Solingen are great. There is an antiqued option if you prefer for a little bit more money. All in all, a great entry level rapier.
Pros
Light well balanced.
Clean and attractive overall appearance.
Replaceable blades and blunt blade options make it VERY versatile.
Cons
Not much edge for draw/push cuts.
Plastic core grip bugs me.
Small grip is tricky for large hands.
Bottom Line
I would absolutely recommend this sword to someone wanting a decent rapier at a low price. It handles well and is attractive, and the replacement and blunt blade options are a HUGE plus. This would be a great 'starter' rapier for someone interested in this type of sword.
Where to buy
You can find both normal and antiqued Solingen Rapiers at KoA for around 200. I bought mine from the above mentioned Hutchinsons Militaria for around 160.
Thanks for reading.
Grovetown, GA. U.S.A.
I love rapiers... LOVE them. My first experience with any sort of sword was fencing with my father. Those are some of the very few good memories I have of him... so maybe thats part of why I love rapiers so much. Or Maybe it was 'The Princess Bride' that did it to me. Either way, I have always had a soft spot for these elegant weapons.
I purchased this Hanwei Solingen from Hutchinsons Militaria (ebay). They are (as Paul mentions in the buyers directory, one of few Ebay vendors you can trust without worry. I've bought a couple swords from them, and it's been a great experience each time.
I was SO excited to get my hands on this one, I forgot to photo the box and packaging. Rest assured tho, future reviews I will (attempt) to remain calm and do so. Everything was boxed and wrapped very well, the sword arrived with no damage or issue, well protected and greased up.
Blade length: 36 5/8
Overall length: 45 1/4
Weight: 2lb 5oz
Width at Guard: .75
Width at Tip: .40
Thickness at Guard: .25
Thickness at Tip: .10
The Blade
Everything disassembles on this (and all, if I'm not mistaken, all) Hanwei rapier. The blade is a very narrow, flexible 4 pointed star shape. It's very abnormal if your not used to rapiers... it seems almost hollow ground. It's formed much like a stiletto. It's not sharp on the edge, it's all about thrusting.
As you can see, the tang is threaded. Hanwei sells blunt blades, and replacement blades, which is actually really cool. That means you can practice and fence with the same setup, and keep a live blade in it when not fencing. Damage a blade... replace it. Spare blades are decently affordable also... they tend to run around 40 - 50 bucks.
I've handled rapiers before that had a more normal, wider and flatter blade that was better for keeping an edge along it's whole length. This one is much more of a dedicated thruster. This is not to say you could NOT give it an edge along it's length, but it would be tricky with so little space to work with. I may try it later, if my sharpening skills improve, because I like to deliver thrust-cuts with a rapier.
There was a little burr at the tip of the blade... I have read from others this is common with the Hanwei rapiers. I took it out no problem with a file, nice and smooth now. And POINTY!
The Grip
Pretty small... a tight fit for my giant paws. It feels good in hand, but for me something just a TAD bigger would be better. If you have large mitts, keep this in mind.
The core is made of plastic, wrapped in wire. I'm not thrilled about the plastic... I'm sure it's durable, but I just don't like plastic in my swords.
The Pommel
Sorry, blurry pic. The pommel isn't overly exciting anyway... it's like a cubed-oval. It has some heft to it and does it's job, keeping your hand in place and transferring some weight behind your hand for better, quicker handling.
The Guard
Simple yet elegant... not overly ornate but still a bit more involved then some more basic guards I have seen. A Good balance, and I like it... one of the reasons I chose this one. It's made from Stainless steel, so you don't have as much upkeep with the guard as with the blade itself.
The scabbard
VERY basic. Some kinda synthetic (fiberglass like many of Hanwei's products?) with a rubber material at the mouth. Covered in black leather. Basic and functional, nothing to write home about. The sword sits loosely in the scabbard and would fall out if tilted downward. Also, being a synthetic, it makes that 'Schhhhing!' sound when drawn that everyone is talking about lately. ;D
Cutting
Well, didn't do any, doesn't have any edge to speak of. I may, as I mentioned, change this later. If I do I'll do some thrust-cuts... and update.
Thrusting
Ah! What a rapier is BUILT for. See for yourself.
It tracks well in hand... but not the BEST. I tried on smaller bottles (20oz) a couple times off camera and missed 2 out of three times from a lunge-thrust. Could be I'm rusty... actually, I KNOW I'm rusty.
The Solingen handles well, is light and flexible as a rapier should be, and has a well tempered flexible blade.
Conclusion
So, in the end, I think this sword is one of the best options in it's price range for this sort of sword. The plastic bothers me... but thats a little thing and you only noticed it when you disassemble the sword. The option to mount blunt blades and get replacement blades is VERY handy and a great feature. The handling and look of the Solingen are great. There is an antiqued option if you prefer for a little bit more money. All in all, a great entry level rapier.
Pros
Light well balanced.
Clean and attractive overall appearance.
Replaceable blades and blunt blade options make it VERY versatile.
Cons
Not much edge for draw/push cuts.
Plastic core grip bugs me.
Small grip is tricky for large hands.
Bottom Line
I would absolutely recommend this sword to someone wanting a decent rapier at a low price. It handles well and is attractive, and the replacement and blunt blade options are a HUGE plus. This would be a great 'starter' rapier for someone interested in this type of sword.
Where to buy
You can find both normal and antiqued Solingen Rapiers at KoA for around 200. I bought mine from the above mentioned Hutchinsons Militaria for around 160.
Thanks for reading.